UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment

Notices

Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Closed Thread
 
Thread Tools
Old 29th May 2018, 10:58 pm   #1
Wendymott
Octode
 
Wendymott's Avatar
 
Join Date: Jun 2013
Location: Huddersfield, West Yorkshire, UK.
Posts: 1,795
Default Marconi 2022 Again !!

HI peeps. This time, no or low RF output above 250 Mhz.
IC10, OM345 the culprit, I was fortunate to have a spare MMIC module in stock, if you have one of these generators, it pays to have one or two modules in the "bin", only took an hour from start to finish. the hard part is getting the solder out of the plated through holes, after removal of the offending device with a hot air gun.
Its quite strange that my old" Clunker" 2022 that I bought for parts is more reliable than the 2022E MOD spec one.
__________________
Should get out more.

Regards
Wendy G8BZY
Wendymott is offline  
Old 29th May 2018, 11:28 pm   #2
MrBungle
Dekatron
 
MrBungle's Avatar
 
Join Date: Jun 2016
Location: London, UK.
Posts: 3,687
Default Re: Marconi 2022 Again !!

I think that’s a Marconi feature. Beat up junk Marconi kit seems to work better. At least it didn’t explode like my pristine 2019A did. Damn 5v reg went short and took out everything digital in it.
MrBungle is offline  
Closed Thread




All times are GMT +1. The time now is 8:25 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.