UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Sets, Parts and Service Information Wanted (private buyers only, no swaps)

Notices

Sets, Parts and Service Information Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps.

Reply
 
Thread Tools
Old 19th Jan 2021, 11:13 pm   #1
nightowl
Triode
 
Join Date: Dec 2019
Location: Lanarkshire, Scotland, UK.
Posts: 18
Default PJ-068 needed

how do all,

I've got an aviation headset with a duff jack, does anybody have a spare PJ-068 I can purchase?

thanks
nightowl is offline   Reply With Quote
Old 20th Jan 2021, 10:29 am   #2
Ed_Dinning
Dekatron
 
Join Date: Jan 2004
Location: Newcastle upon Tyne, Tyne & Wear, UK.
Posts: 6,571
Default Re: PJ-068 needed

Hi, I think one of the advertisers in the Pilot magazine has a place just off the Edinburgh ring road and is not expensive

Ed
Ed_Dinning is offline   Reply With Quote
Old 20th Jan 2021, 11:54 am   #3
Radio Wrangler
Moderator
 
Radio Wrangler's Avatar
 
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 16,728
Default Re: PJ-068 needed

Harry Mendelssohn pilot supplies? By Napier university. Beware of parking near there.

Well known and trusted firm. They were one of our first dealers and helped us a lot.

David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done
Radio Wrangler is online now   Reply With Quote
Old 20th Jan 2021, 12:02 pm   #4
nightowl
Triode
 
Join Date: Dec 2019
Location: Lanarkshire, Scotland, UK.
Posts: 18
Default Re: PJ-068 needed

thanks I'll look them/it up, haven't purchased a pilot mag in donkeys.....
nightowl is offline   Reply With Quote
Old 20th Jan 2021, 12:04 pm   #5
nightowl
Triode
 
Join Date: Dec 2019
Location: Lanarkshire, Scotland, UK.
Posts: 18
Default Re: PJ-068 needed

just looked, 22 for a plug! out of stock anyways..... me thinks me look elsewhere......
nightowl is offline   Reply With Quote
Old 20th Jan 2021, 1:52 pm   #6
Ed_Dinning
Dekatron
 
Join Date: Jan 2004
Location: Newcastle upon Tyne, Tyne & Wear, UK.
Posts: 6,571
Default Re: PJ-068 needed

Wow, that seems a swinging increase since I last bought one

Ed
Ed_Dinning is offline   Reply With Quote
Old 21st Jan 2021, 11:23 am   #7
G6ONEDave
Heptode
 
G6ONEDave's Avatar
 
Join Date: Dec 2019
Location: Owston Ferry, North Lincolnshire, UK.
Posts: 556
Default Re: PJ-068 needed

I have some used plugs that look similar but are stamped with '316' on the insulator body, I don't know if they are dimensionally the same size. Will try to get a photo if it helps.
Dave
G6ONEDave is offline   Reply With Quote
Old 21st Jan 2021, 5:24 pm   #8
G6ONEDave
Heptode
 
G6ONEDave's Avatar
 
Join Date: Dec 2019
Location: Owston Ferry, North Lincolnshire, UK.
Posts: 556
Default Re: PJ-068 needed

Here is the photo of the used jack plugs that I have.
Dave
Attached Thumbnails
Click image for larger version

Name:	DSCN3012.jpg
Views:	47
Size:	68.6 KB
ID:	225091  
G6ONEDave is offline   Reply With Quote
Old 21st Jan 2021, 11:36 pm   #9
nightowl
Triode
 
Join Date: Dec 2019
Location: Lanarkshire, Scotland, UK.
Posts: 18
Default Re: PJ-068 needed

they do look very similar! more so the 2 on the right.
nightowl is offline   Reply With Quote
Old 22nd Jan 2021, 2:10 pm   #10
AC/HL
Dekatron
 
AC/HL's Avatar
 
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 9,189
Default Re: PJ-068 needed

They look more telecoms, slightly narrower than the usual .25 inch: https://transair.co.uk/headsets-and-...mic-plug-s-267
__________________
Bill, BVWS member
AC/HL is offline   Reply With Quote
Old 22nd Jan 2021, 4:18 pm   #11
nightowl
Triode
 
Join Date: Dec 2019
Location: Lanarkshire, Scotland, UK.
Posts: 18
Default Re: PJ-068 needed

ac/hl, the ones you posted or daves?
nightowl is offline   Reply With Quote
Old 22nd Jan 2021, 5:14 pm   #12
AC/HL
Dekatron
 
AC/HL's Avatar
 
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 9,189
Default Re: PJ-068 needed

I was referring to the ones in post 8 because of the "curvy" appearance and the central fixing screw.
__________________
Bill, BVWS member
AC/HL is offline   Reply With Quote
Old 23rd Jan 2021, 4:21 pm   #13
nightowl
Triode
 
Join Date: Dec 2019
Location: Lanarkshire, Scotland, UK.
Posts: 18
Default Re: PJ-068 needed

the 2 on the right look alot like mine I need replacing but also like the David clark 'mic' plug on one of my other headsets but also different to the other 2 headsets I have set up.....I ordered a neutrik plug but the way of connecting the wires up to it look like none I've seen, looks like a cross between bayonet and solder....
nightowl is offline   Reply With Quote
Reply

Thread Tools



All times are GMT. The time now is 12:10 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.