Part Needed For A Sanyo Model S-61TMR Tape Recorder - UK Vintage Radio Repair and Restoration Discussion Forum

hstaples · 6th May 2020, 5:59 pm

I need your help guy's. I have a Sanyo Model S-M61TMR reel to reel recorder and whilst I was servicing it I turned the little silver cap which has a REVERSED thread the wrong way with pliers and snapped it off as you can see from the pics. This cap holds the rubber pinch roller in place, without this part I cannot use the machine.Can anybody help me source this part please. Please see pic attachments. Many thanks, Harvey.

DMcMahon · 7th May 2020, 8:30 am

I would have a go at super gluing the broken threaded stub back to the cap.

hstaples · 13th May 2020, 9:36 pm

Hi, Because it's not a clean break the stub will not sit straight enough for gluing it back on, but thanks anyway.

6th May 2020, 5:59 pm	#1
hstaples Diode Join Date: Apr 2015 Location: London, UK. Posts: 8	Part Needed For A Sanyo Model S-61TMR Tape Recorder I need your help guy's. I have a Sanyo Model S-M61TMR reel to reel recorder and whilst I was servicing it I turned the little silver cap which has a REVERSED thread the wrong way with pliers and snapped it off as you can see from the pics. This cap holds the rubber pinch roller in place, without this part I cannot use the machine.Can anybody help me source this part please. Please see pic attachments. Many thanks, Harvey. Attached Thumbnails

7th May 2020, 8:30 am	#2
DMcMahon Dekatron Join Date: Apr 2019 Location: Worthing, West Sussex, UK. Posts: 6,604	Re: Part Needed For A Sanyo Model S-61TMR Tape Recorder I would have a go at super gluing the broken threaded stub back to the cap.

13th May 2020, 9:36 pm	#3
hstaples Diode Join Date: Apr 2015 Location: London, UK. Posts: 8	Re: Part Needed For A Sanyo Model S-61TMR Tape Recorder Hi, Because it's not a clean break the stub will not sit straight enough for gluing it back on, but thanks anyway.