UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Radio (domestic)

Notices

Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only.

Reply
 
Thread Tools
Old 14th Jan 2020, 12:53 pm   #1
mcolliva
Diode
 
Join Date: Jan 2020
Location: Turin, Italy
Posts: 3
Default First post first question about Philips B2G81U

Good morning all
it's my first post here my name is Marco, 58 years old, living in Turin - Italy.
Recently I bought a Philips B2G81U in poor condition, a lot of rust and many issues.
Issue 1: MW/LW selector broken so think to replace using a switch 2 pole-6 positions but I'm not sure how to connect original wires and components on new one.
Issue 2: on-off switch broken but maybe can replace or repair.
if someone have a close pic of MW/LW selector in both position maybe usefull.
Have a great Tuesday all
MArco
mcolliva is offline   Reply With Quote
Old 14th Jan 2020, 1:13 pm   #2
AC/HL
Moderator
 
AC/HL's Avatar
 
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 7,757
Default Re: First post first question about Philips B2G81U

Hello and welcome,
The manufacturers service data shows the wiring between the switches and printed circuit: https://www.service-data.com/product...61/6028/m14661
__________________
Bill, BVWS member
AC/HL is offline   Reply With Quote
Old 14th Jan 2020, 2:29 pm   #3
mcolliva
Diode
 
Join Date: Jan 2020
Location: Turin, Italy
Posts: 3
Default Re: First post first question about Philips B2G81U

Quote:
Originally Posted by AC/HL View Post
Hello and welcome,
The manufacturers service data shows the wiring between the switches and printed circuit: https://www.service-data.com/product...61/6028/m14661
Thank you Bill for your fast answer.
mcolliva is offline   Reply With Quote
Old 15th Jan 2020, 5:33 pm   #4
telstar
Octode
 
Join Date: Dec 2003
Location: Leeds, West Yorkshire, UK.
Posts: 1,107
Default Re: First post first question about Philips B2G81U

Hello.
I am sure that I had a spare chassis for this radio, which of course contains the switches.
Will have a look for you, can not promise anything.
Unfortunately, I am in the process of selling all of my items off.
Mike
telstar is offline   Reply With Quote
Old 15th Jan 2020, 5:42 pm   #5
mcolliva
Diode
 
Join Date: Jan 2020
Location: Turin, Italy
Posts: 3
Default Re: First post first question about Philips B2G81U

Hi Mike
thanks in advance for your search, as wrote I could replace broken switches but on MW/LW switch I'm doubtful, looking on schematic frankly doubt remain.
Have a nice evening
MArco
mcolliva is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 8:54 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.