![]() |
![]() |
![]() |
|
Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment. |
![]() |
|
Thread Tools |
![]() |
#1 |
Diode
Join Date: Sep 2023
Location: Edinburgh, Scotland, UK.
Posts: 3
|
![]()
Guys any ideas … Newly purchased Kenwood ts711e, can’t seem to get any audio from it, occasionally if I press the attenuator button and then the ch.q button I can get about 30 seconds off rf hiss before it just cuts off. If I press the attenuator button whilst there is audio it normally cuts the audio of as well. This is all on ssb can’t get anything on FM mode. Sure I have everything set fine ie. squelch setting and rf gain .
Any ideas ? Anyone based uk able to help me out with reasonable priced repairs ? Unfortunately suffering health issues.. cancer just now and not able to work . |
![]() |
![]() |
![]() |
#2 |
Diode
Join Date: Sep 2023
Location: Edinburgh, Scotland, UK.
Posts: 3
|
![]()
Also noticed occasionally the radio upon switch on will produce rf noise but after so long just cuts out.
|
![]() |
![]() |
![]() |
#3 |
Dekatron
Join Date: Aug 2007
Location: W.Butterwick, near Doncaster UK.
Posts: 8,877
|
![]()
Worth talking to Kent Rigs, seem to get very good ratings.
__________________
G8JET BVWS Archivist and Member V.M.A.R.S |
![]() |
![]() |
![]() |
#4 |
Diode
Join Date: Sep 2023
Location: Edinburgh, Scotland, UK.
Posts: 3
|
![]()
Okay thanks appreciate that. Found earlier tonight that when the problem arose ie. the majority of the time ! that pressing ptt of the mic in FM mode kicked the RF noise into life only to cut out again shortly afterwards ! Thought a sticky relay could have been the issue but unfortunately the ptt method of getting the rx is not working when tried tonight .
|
![]() |
![]() |