The Thanks Thread - Page 68 - UK Vintage Radio Repair and Restoration Discussion Forum

steve.seven · 17th Oct 2020, 12:20 pm

Quote:

Originally Posted by electronicskip

Many thanks to steve.seven for the radios including an extra one i was not expecting! thank you.

Your very welcome Richard, thanks for coming and picking them up, a varied collection but hope you will enjoy them.

Regards,
Steve.

wireless_john · 18th Oct 2020, 4:24 pm

My thanks to 'Shuttle', who responded to my request for wiring combs and gave me enough to fulfil my current Z80 project and more besides.

He then followed this up by generously sending me two Z80 books he no longer wanted and I will get a lot from - so a big thank you 'Shuttle'.

John

DMcMahon · 21st Oct 2020, 8:10 pm

Many thanks to Uncle Bulgaria for the FOC Weller S1 5mm bits for SI-25.

Unfortunately they are too small for my Weller iron, I will try a couple of ideas to make them fit, if no good I will offer them FOC.

David

deliverance · 26th Oct 2020, 11:11 am

Thanks to trh01uk for the Atalanta manual which arrived this morning much appreciated.

Skywave · 26th Oct 2020, 7:40 pm

My many thanks to Ken - Radio Tech - for the free 12E1 valve - incl. free postage.

Al. / Oct. 26, 2020

paulsherwin · 28th Oct 2020, 10:33 am

Many thanks to mole42uk for the Huawei 4G MiFi dongle, which will provide an excellent backup facility for my broadband connection.

Bear2Biker · 28th Oct 2020, 3:50 pm

Many thanks to MOFYA Andy for the CT4436 info

beltinge bore · 1st Nov 2020, 2:05 pm

Many Thanks to Tony Hellyer for the HMV 1807 parts donor.

Regards Steve Gadsden

gezza123 · 5th Nov 2020, 2:40 pm

Many thanks to Megatron
for the T.WITTS book.

Arrived today well packed
Thank you

gezza123

Chris55000 · 6th Nov 2020, 5:55 pm

Hi!

My joint grateful thanks to Members "G6ONEDave" and "Mikeymushradio" who are supplying the Bush A823 Service Manual I desired – I'll be starting a thread when I get round to the set next year once I've got my PM5518 repaired to provide the u.h.f. 625–line output (set is stored in lockups) – it's appears to be a late touch–tune model, and the main problem is all the wiring has been munched by our very small furry p.v.c. loving friends, this is the sort of job where you want a full S.M. to hand rather than circuits on their own!

Chris Williams

PaulR · 7th Nov 2020, 9:18 am

Many thanks to Mike Phelan for his expert repair of a clock wheel. The part itself isn't electric but I think he deserves thanks as he has done a great job and even refused payment for the postage.

Bear2Biker · 12th Nov 2020, 3:45 pm

Many thanks to Vintage_8bit Colin for the D61a manuals, have now arrived and nicely preserved.

Kentode · 13th Nov 2020, 7:16 pm

Sincere thanks to the twenty-two people who offered me help restoring my PYE R33, especially murphyv310, Trevor and Gabe001, Gabriel.

As anyone who followed the thread Will know, l really couldn't have done it without you.

Thank you.

Martin Bush · 19th Nov 2020, 3:37 pm

I often forget to do this so, first thank you and apologies to everyone who has helped me in the past that I've not thanked on this thread.

Second, thank you to @restoration73 for the splice tape and 8 track foil.

Also lastly, thanks to @dodgy-dxer for the Gerry Wells book.

Viscount · 19th Nov 2020, 4:15 pm

many thank to David G4EBT for kindly printing the battrymax labels for me (B103)it has made my eveready model c complete,looks good inside now as well as outside

DMcMahon · 21st Nov 2020, 11:45 am

Many thanks to bionicmerlin (Andy) for shipping the ITT SL 530 cassette recorder that I purchased, arrived safely a couple of days ago.

David

HamishBoxer · 25th Nov 2020, 12:19 pm

Many thanks (David G4EBT) for the cartridges.

Regards,

David

Keith956 · 27th Nov 2020, 11:23 am

Thank you merlinmaxwell for the Tektronix 475! And it works! Needs taking apart and a few slightly stuff switches cleaned but all seems to be well.

DMcMahon · 27th Nov 2020, 1:37 pm

Thank you to John (oldjohn), received today the flexible grey wire and red/blue sleeving.

David

woodchips · 28th Nov 2020, 2:38 pm

Thanks to megatron for the McGraw Hill books.

18th Oct 2020, 4:24 pm	#1342
wireless_john Hexode Join Date: Apr 2011 Location: Gosport, Hampshire, UK. Posts: 461	Re: The Thanks Thread My thanks to 'Shuttle', who responded to my request for wiring combs and gave me enough to fulfil my current Z80 project and more besides. He then followed this up by generously sending me two Z80 books he no longer wanted and I will get a lot from - so a big thank you 'Shuttle'. John __________________ GQRP Club 4704 - BVWS Member

21st Oct 2020, 8:10 pm	#1343
DMcMahon Nonode Join Date: Apr 2019 Location: Worthing, West Sussex, UK. Posts: 2,993	Re: The Thanks Thread Many thanks to Uncle Bulgaria for the FOC Weller S1 5mm bits for SI-25. Unfortunately they are too small for my Weller iron, I will try a couple of ideas to make them fit, if no good I will offer them FOC. David

26th Oct 2020, 11:11 am	#1344
deliverance Hexode Join Date: Apr 2015 Location: Manchester, UK. Posts: 419	Re: The Thanks Thread Thanks to trh01uk for the Atalanta manual which arrived this morning much appreciated.

26th Oct 2020, 7:40 pm	#1345
Skywave Dekatron Join Date: Jun 2006 Location: Chard, South Somerset, UK. Posts: 7,038	Re: The Thanks Thread My many thanks to Ken - Radio Tech - for the free 12E1 valve - incl. free postage. Al. / Oct. 26, 2020 __________________ Chard, Somerset - The birthplace of powered flight and prosthetic limbs.

28th Oct 2020, 10:33 am	#1346
paulsherwin Moderator Join Date: Jun 2003 Location: Oxford, UK Posts: 21,127	Re: The Thanks Thread Many thanks to mole42uk for the Huawei 4G MiFi dongle, which will provide an excellent backup facility for my broadband connection.

28th Oct 2020, 3:50 pm	#1347
Bear2Biker Triode Join Date: Jan 2011 Location: Bradford, West Yorkshire, UK. Posts: 19	Re: The Thanks Thread Many thanks to MOFYA Andy for the CT4436 info __________________ Bear2Biker

1st Nov 2020, 2:05 pm	#1348
beltinge bore Pentode Join Date: Dec 2012 Location: Herne Bay, Kent, UK. Posts: 182	Re: The Thanks Thread Many Thanks to Tony Hellyer for the HMV 1807 parts donor. Regards Steve Gadsden

5th Nov 2020, 2:40 pm	#1349
gezza123 Heptode Join Date: Mar 2010 Location: Eastham, Wirral, Merseyside, UK. Posts: 757	Re: The Thanks Thread Many thanks to Megatron for the T.WITTS book. Arrived today well packed Thank you gezza123

6th Nov 2020, 5:55 pm	#1350
Chris55000 Octode Join Date: Aug 2007 Location: Walsall Wood, Aldridge, Walsall, UK. Posts: 1,537	Re: The Thanks Thread Hi! My joint grateful thanks to Members "G6ONEDave" and "Mikeymushradio" who are supplying the Bush A823 Service Manual I desired – I'll be starting a thread when I get round to the set next year once I've got my PM5518 repaired to provide the u.h.f. 625–line output (set is stored in lockups) – it's appears to be a late touch–tune model, and the main problem is all the wiring has been munched by our very small furry p.v.c. loving friends, this is the sort of job where you want a full S.M. to hand rather than circuits on their own! Chris Williams __________________ It's an enigma, that's what it is! This thing's not fixed because it doesn't want to be fixed!

7th Nov 2020, 9:18 am	#1351
PaulR Nonode Join Date: Oct 2003 Location: Southport Lancashire, UK. Posts: 2,455	Re: The Thanks Thread Many thanks to Mike Phelan for his expert repair of a clock wheel. The part itself isn't electric but I think he deserves thanks as he has done a great job and even refused payment for the postage. __________________ Paul

12th Nov 2020, 3:45 pm	#1352
Bear2Biker Triode Join Date: Jan 2011 Location: Bradford, West Yorkshire, UK. Posts: 19	Re: The Thanks Thread Many thanks to Vintage_8bit Colin for the D61a manuals, have now arrived and nicely preserved. __________________ Bear2Biker

13th Nov 2020, 7:16 pm	#1353
Kentode Heptode Join Date: Mar 2015 Location: Todmorden, West Yorkshire, UK. Posts: 582	Re: The Thanks Thread Sincere thanks to the twenty-two people who offered me help restoring my PYE R33, especially murphyv310, Trevor and Gabe001, Gabriel. As anyone who followed the thread Will know, l really couldn't have done it without you. Thank you. __________________ Regards, Ken. BVWS member

19th Nov 2020, 3:37 pm	#1354
Martin Bush Octode Join Date: Jan 2015 Location: Oxfordshire, UK. Posts: 1,474	Re: The Thanks Thread I often forget to do this so, first thank you and apologies to everyone who has helped me in the past that I've not thanked on this thread. Second, thank you to @restoration73 for the splice tape and 8 track foil. Also lastly, thanks to @dodgy-dxer for the Gerry Wells book. __________________ Is it live, or is it... no, it's live actually...

19th Nov 2020, 4:15 pm	#1355
Viscount Hexode Join Date: Jan 2018 Location: Folkestone, Kent, UK. Posts: 377	Re: The Thanks Thread many thank to David G4EBT for kindly printing the battrymax labels for me (B103)it has made my eveready model c complete,looks good inside now as well as outside

21st Nov 2020, 11:45 am	#1356
DMcMahon Nonode Join Date: Apr 2019 Location: Worthing, West Sussex, UK. Posts: 2,993	Re: The Thanks Thread Many thanks to bionicmerlin (Andy) for shipping the ITT SL 530 cassette recorder that I purchased, arrived safely a couple of days ago. David

25th Nov 2020, 12:19 pm	#1357
HamishBoxer Dekatron Join Date: Aug 2007 Location: W.Butterwick, near Doncaster UK. Posts: 7,796	Re: The Thanks Thread Many thanks (David G4EBT) for the cartridges. Regards, David __________________ G8JET BVWS Member and V.M.A.R.S

27th Nov 2020, 11:23 am	#1358
Keith956 Hexode Join Date: Jun 2019 Location: Thame, Oxfordshire. Posts: 257	Re: The Thanks Thread Thank you merlinmaxwell for the Tektronix 475! And it works! Needs taking apart and a few slightly stuff switches cleaned but all seems to be well.

27th Nov 2020, 1:37 pm	#1359
DMcMahon Nonode Join Date: Apr 2019 Location: Worthing, West Sussex, UK. Posts: 2,993	Re: The Thanks Thread Thank you to John (oldjohn), received today the flexible grey wire and red/blue sleeving. David

28th Nov 2020, 2:38 pm	#1360
woodchips Heptode Join Date: May 2010 Location: Grantham, Lincolnshire, UK. Posts: 890	Re: The Thanks Thread Thanks to megatron for the McGraw Hill books.