UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Sets, Parts and Service Information Wanted (private buyers only, no swaps)

Notices

Sets, Parts and Service Information Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps.

Reply
 
Thread Tools
Old 8th Jan 2019, 9:16 pm   #1
James Duncan
Pentode
 
Join Date: May 2010
Location: Wick, Scotland, UK.
Posts: 133
Default Wanted, extender boards

I am looking for extender boards for use with a Yaesu ft 101.

Can anyone help, sell me or even a paid loan of these.

Thanks, MM0HDW.
James Duncan is offline   Reply With Quote
Old 8th Jan 2019, 10:42 pm   #2
mickm3for
Tetrode
 
Join Date: May 2015
Location: Chatham, Kent, UK.
Posts: 53
Default Re: Wanted, extender boards

Hi i made some for the ft one .The 101 would only require single side pcb and the pcb sockets. what i did was to cut the copper into strips with the correct spacing then solder the sockets to the top edge (they look like perf board without the holes
hope this helps
mickm3for is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 7:57 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.