|
Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc. |
|
Thread Tools |
23rd Apr 2018, 3:49 pm | #21 |
Dekatron
Join Date: May 2003
Location: Edinburgh, UK.
Posts: 3,273
|
Re: Sony 9-90 Width Control?
I had a go at the select on test capacitor for 405. Increasing the value makes the picture larger and it was already loaded with the minimum value of 0.001uF.
I tried removing it and the two silicon diodes I had put in the 12 volt rail but the picture was still too large and that was even true with only one diode in the rail. So I am back with the 0.001uF in place and my two diodes. This takes the rail to about 11 volts. Peter |