UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Success Stories

Notices

Success Stories If you have successfully repaired or restored a piece of equipment, why not write up what you did and post details here. Particularly if it was interesting, unusual or challenging. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Reply
 
Thread Tools
Old 19th Oct 2020, 8:56 am   #21
Radio Wrangler
Moderator
 
Radio Wrangler's Avatar
 
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 15,901
Default Re: F. Stephen Masek's HMV468 restoration

Threads merged.

Good detective work. That wiring error removed all negative bias from the PX4 so the poor thing would have been locked into carrying maximum current, and that explains the low audio output. I'm glad it seems to have survived and lives to play another day.

This is the best possible outcome!

David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done
Radio Wrangler is offline   Reply With Quote
Old 19th Oct 2020, 3:34 pm   #22
FStephenMasek
Pentode
 
Join Date: Jul 2011
Location: Mission Viejo, California, USA
Posts: 102
Default Re: Success with an HMV468

Quote:
Originally Posted by SeanStevens View Post
Nice work detecting the error in the wiring!

How are you running it with your 110v supply? A British radio normally runs at 240v - 50 hz.

SEAN
I have it set at 250 volts, and am using my 120 to 240 transformer. Of course, the clock will not keep time in the USA. I will almost surely take the radio back to Europe. We have a second home in Vilnius, Lithuania.
FStephenMasek is offline   Reply With Quote
Old 21st Oct 2020, 9:23 am   #23
vinrads
Nonode
 
Join Date: Feb 2009
Location: Chesterfield, Derbyshire, UK.
Posts: 2,423
Default Re: F. Stephen Masek's HMV468 restoration

Very nice restoration job ,love the finish on the cabinet , these sets are not for the faint hearted , well done. Mick.
vinrads is offline   Reply With Quote
Old 24th Oct 2020, 3:37 am   #24
FStephenMasek
Pentode
 
Join Date: Jul 2011
Location: Mission Viejo, California, USA
Posts: 102
Default Re: F. Stephen Masek's HMV468 restoration

Thank you! Indeed, this is not one for a beginner. It has been interesting learning that the same chassis was used in quite a few different models. The fuse in the center tap of B+ has probably helped prevent many of them from being scrapped due to power transformers destroyed by bad capacitors. Do any of you have another radio with this chassis? Pictures?
FStephenMasek is offline   Reply With Quote
Old 24th Oct 2020, 10:15 am   #25
PaulR
Nonode
 
PaulR's Avatar
 
Join Date: Oct 2003
Location: Southport Lancashire, UK.
Posts: 2,343
Default Re: F. Stephen Masek's HMV468 restoration

Very nice restoration. It is threads like this which provide a reference and hints for those tackling repairs on similar sets.
__________________
Paul
PaulR is offline   Reply With Quote
Old 21st Nov 2020, 11:44 pm   #26
FStephenMasek
Pentode
 
Join Date: Jul 2011
Location: Mission Viejo, California, USA
Posts: 102
Default Re: F. Stephen Masek's HMV468 restoration

I aligned it today. It sounds great playing the Mandarin music station, AM690, when I took this photo.
Attached Thumbnails
Click image for larger version

Name:	20201121_143756.jpg
Views:	30
Size:	122.2 KB
ID:	220954  
FStephenMasek is offline   Reply With Quote
Old Yesterday, 2:41 am   #27
FStephenMasek
Pentode
 
Join Date: Jul 2011
Location: Mission Viejo, California, USA
Posts: 102
Default Re: F. Stephen Masek's HMV468 restoration

I tried my hand at some blacksmith work today to make a new chassis bottom brace. I had one of the originals. I got a piece of steel, but was wondering how to bend it, as I do not have a vice. I do have some large hammers and a MAPP torch, so laid the strap on one hammer, heated the steel red hot, then used the other hammer to pound it over, then quenched it in the birdbath. I then drilled and tapped the strap.
Attached Thumbnails
Click image for larger version

Name:	20201122_165410.jpg
Views:	20
Size:	130.8 KB
ID:	221048  
FStephenMasek is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 1:06 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.