|
Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only. |
|
Thread Tools |
4th Apr 2019, 3:31 pm | #1 |
Hexode
Join Date: Sep 2013
Location: Wembley, London, UK.
Posts: 395
|
EBC41 valve pins
Hello to all. Valve 3, in Phillips 400A is EBC41. I was wondering if some Forum Member could advise me, regarding the pins on this valve. On the Philips circuit manual, Vg2 is noted as having a voltage of 90 volts. My problem is; where is 'g2'. The voltage on Anode is 150 volts. Thanks in advance for advise. All the best. John.
|
4th Apr 2019, 3:37 pm | #2 |
Dekatron
Join Date: Aug 2013
Location: Wigan, Greater Manchester, UK.
Posts: 9,433
|
Re: EBC41 valve pins
An EBC41 is a double diode triode, it does not have a G2.
__________________
Frank |
4th Apr 2019, 3:42 pm | #3 |
Dekatron
Join Date: Nov 2011
Location: Surrey, UK.
Posts: 4,395
|
Re: EBC41 valve pins
Yes, it's spurious- perhaps misplaced from another valve/part of the circuit, maybe the draughtsman had a long day.
|
4th Apr 2019, 3:44 pm | #4 |
Dekatron
Join Date: Aug 2013
Location: Wigan, Greater Manchester, UK.
Posts: 9,433
|
Re: EBC41 valve pins
Circuit voltages from the Trader circuit.
__________________
Frank |
4th Apr 2019, 5:54 pm | #5 |
Hexode
Join Date: Sep 2013
Location: Wembley, London, UK.
Posts: 395
|
Re: EBC41 valve pins
Hello to everyone. Thanks for all the replies. I feel better now. All the best. John.
|