UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Television Standards Converters, Modulators etc
Reload this Page Modeline experiments
Register FAQ Forum Rules Calendar Mark Forums Read

Notices

Television Standards Converters, Modulators etc Standards converters, modulators anything else for providing signals to vintage televisions.

Reply
Page 3 of 3 12 3
 
Thread Tools
Old 19th Jun 2022, 12:31 pm   #41
dalekmoore2007
Pentode
 
Join Date: Aug 2008
Location: Melbourne, Australia
Posts: 201
Default Re: Modeline experiments
I have the horizontal scan up i am going to need a position control to work out the amount the correct adjustment to the 5 ohm resistor .
Also will be experimenting with the 2 capacitors on the input and yoke coil
Scans about 10 khz as i will be trying 405 line first when i get the raster correct
Attached Thumbnails
Click image for larger version Name: Deflectionampl.GIF Views: 22 Size: 5.2 KB ID: 259329   Click image for larger version Name: DSCN7693.jpg Views: 19 Size: 75.6 KB ID: 259330  
dalekmoore2007 is offline   Reply With Quote
Reply
Page 3 of 3 12 3

« Previous Thread | Next Thread »
Thread Tools



All times are GMT. The time now is 4:07 am.

Contact Us - Home - Forum Rules, Privacy & Disclaimer - Top

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.