|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
14th May 2008, 5:13 pm | #21 |
Retired Dormant Member
Join Date: Jan 2008
Location: Linz, Austria
Posts: 10
|
Re: Gould OS4000 Storage oscilloscope
Upload #1
|
14th May 2008, 5:14 pm | #22 |
Retired Dormant Member
Join Date: Jan 2008
Location: Linz, Austria
Posts: 10
|
Re: Gould OS4000 Storage oscilloscope
Upload #2
|
14th May 2008, 5:15 pm | #23 |
Retired Dormant Member
Join Date: Jan 2008
Location: Linz, Austria
Posts: 10
|
Re: Gould OS4000 Storage oscilloscope
Upload #3
|
14th May 2008, 5:17 pm | #24 |
Retired Dormant Member
Join Date: Jan 2008
Location: Linz, Austria
Posts: 10
|
Re: Gould OS4000 Storage oscilloscope
Upload #4
|
14th May 2008, 5:18 pm | #25 |
Retired Dormant Member
Join Date: Jan 2008
Location: Linz, Austria
Posts: 10
|
Re: Gould OS4000 Storage oscilloscope
Upload #5
|
14th May 2008, 5:20 pm | #26 |
Retired Dormant Member
Join Date: Jan 2008
Location: Linz, Austria
Posts: 10
|
Re: Gould OS4000 Storage oscilloscope
Upload #6
|
14th May 2008, 5:29 pm | #27 |
Retired Dormant Member
Join Date: Jan 2008
Location: Linz, Austria
Posts: 10
|
Re: Gould OS4000 Storage oscilloscope
Upload #7 - FINAL
These are, as promised, the completely assembled circuit diagrams. I had them finished a long time ago, but first the upload was not working and then ... I forgot. Some images are png and some jpg, due to the upload file constraint. Chris, is your machine again up and running? I am still interested in the OS4001 material, the 'Interconnections (Contd.)' and the component listing for the interconnection diagram. It does not matter if it takes time... Thanks! |
18th May 2008, 10:49 am | #28 |
Nonode
Join Date: Aug 2007
Location: Walsall Wood, Aldridge, Walsall, UK.
Posts: 2,866
|
Re: Gould OS4000 Storage oscilloscope
Hi!
I've checked my '4000 manual again - you *do* have all there is, honest! You'll find all the parts lists in my earlier posts p1 of this thread! Regarding the '4001, I'll scan & post it as soon as I can root it out - its got buried in my shambles at the moment! I've now procured an A3 scanner so I'll be able to post the diagram whole! Sorry for the delay - I've not forgotten it! Chris Williams Last edited by Chris55000; 18th May 2008 at 10:55 am. |