![]() |
![]() |
![]() |
|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
![]() |
|
Thread Tools |
![]() |
#1 |
Pentode
Join Date: May 2015
Location: Hemel Hempstead, Hertfordshire, UK.
Posts: 125
|
![]()
I've just bought a Thurlby LA160B Logic Analyser and I'd like to download the EPROM firmware (including the LR-64 option ROM) so that I can have a backup. Does anyone know where I can download the firmware from? Thanks.
David. |
![]() |
![]() |
#2 |
Octode
Join Date: Feb 2007
Location: Ely, Cambridgeshire, UK.
Posts: 1,932
|
![]()
Try joining and asking here https://www.eevblog.com/ there is a large membership of testgear repairing members
|
![]() |
![]() |
#3 |
Pentode
Join Date: May 2015
Location: Hemel Hempstead, Hertfordshire, UK.
Posts: 125
|
![]()
I'm a member of EEVBLOG forum as well. I will post a request there later today. Thanks.
David. |
![]() |
![]() |
#4 |
Heptode
Join Date: Jun 2009
Location: St Helens, Lancashire, UK.
Posts: 634
|
![]()
Just checking what I have for the LA160.
I have LA160V50.hex file (I think it was the last version) and LA-PROG windows software. I also have some LA160's so not sure if they have the option ROM in them that I could read out. Document wise I also have a pdf of the service manual which includes circuit diagrams. Anything of any interest?
__________________
SPECIALIST.....Knows everything about nothing EXPERT..........Knows nothing about everything |
![]() |
![]() |
#5 |
Pentode
Join Date: May 2015
Location: Hemel Hempstead, Hertfordshire, UK.
Posts: 125
|
![]()
Thanks PETERg0rsq,
I have the service manual, but the ROMS and the windows software would be useful as an additional backup. The LA160B i've bought is on its way from Springfield, Ohio, and it has the LR64 option ROM installed. David. |
![]() |