UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment


Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Closed Thread
Thread Tools
Old 4th May 2019, 8:19 pm   #1
Join Date: Oct 2018
Location: Carrickfergus, County Antrim, Northern Ireland, UK.
Posts: 51
Default Philips FM1100 computer data programmer

Hello all, but mainly to Philips Simoco engineers. I am looking for a copy of the CDP7 software. I have at long last got the Protocol Converter Card and I fitted it into two different PCs but it will not read either an FM1100 radio or the portable data programmer. I am running the factory data programmer fdp7 that I got from the Yahoo fm1100 group but I suspect the card I have is not compatible with the fdp7 software. The CDP recognises that there is an external device connected but refuses to read from the device into the CDP editor. Can anyone help please?

Closed Thread

Thread Tools

All times are GMT +1. The time now is 2:14 pm.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.