UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Amateur and Military Radio

Notices

Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment.

Reply
 
Thread Tools
Old 10th Aug 2022, 9:21 pm   #1
thermion
Triode
 
Join Date: Dec 2011
Location: Cheshire, UK.
Posts: 26
Default Eddystone EC958.

Another long term project of mine is this eddystone ec958.
Itís the one with the dot matrix l.e.d readout.
The problem is the incremental oscillator has no output.
So no drive to the readout, & not working on the higher bands.
Iíve simulated the output with a sig gen & it tunes over its band & the readout works. Dismantling the thing is a real pain because itís soldered into a close fitting copper oven stuffed with glass wool.
I had downloaded the manual, & had a look at it, but no joy.
Any advice before I chuck it? Itís been on the list but itís a bit beyond me this one.
thermion is offline   Reply With Quote
Old 12th Sep 2022, 9:27 am   #2
Sputniksam
Diode
 
Join Date: Sep 2022
Location: Otley, West Yorkshire, UK.
Posts: 5
Default Re: Eddystone EC958.

I can’t offer any advice but I would urge you to persevere with the radio. I have an earlier version of the EC958, with the analogue projection readout, that had a PSU fault. It took me a good few years to finally fix it and I’m really glad I did as it’s a fantastic receiver. It also has sentimental value for me as it was one of two EC958’s used in the radio room of the QE2.

Nidge (G0NIG)
Sputniksam is offline   Reply With Quote
Old 12th Sep 2022, 12:04 pm   #3
HamishBoxer
Dekatron
 
HamishBoxer's Avatar
 
Join Date: Aug 2007
Location: W.Butterwick, near Doncaster UK.
Posts: 8,544
Default Re: Eddystone EC958.

Possibly advice from VMARS group.
__________________
G8JET BVWS Archivist and Member V.M.A.R.S
HamishBoxer is offline   Reply With Quote
Old 12th Sep 2022, 3:35 pm   #4
bc312
Pentode
 
bc312's Avatar
 
Join Date: Feb 2005
Location: Longfield, Kent, UK.
Posts: 216
Default Re: Eddystone EC958.

...or the Eddystone User Group forum.
__________________
Leave me alone - I know what I'm doing.

BVWS member, EUG
Radio Bygones/Radiophile
bc312 is offline   Reply With Quote
Reply

Thread Tools



All times are GMT. The time now is 8:28 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.