UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Sets, Parts and Service Information Wanted (private buyers only, no swaps)

Notices

Sets, Parts and Service Information Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps.

Reply
 
Thread Tools
Old 6th Aug 2022, 12:35 pm   #1
Sparky67
Hexode
 
Sparky67's Avatar
 
Join Date: Feb 2008
Location: Great Barr, Sandwell, West Midlands, UK.
Posts: 460
Default Racal PCBs

Hi all,

Bit of a long shot I know but I’m looking for a scrap IF board used in some Racal transceivers in their 4000-series era. Specifically board numbers:

MA4040A (PRM4041A)
719171 (PRM4021)
704737 (PRM4031 & VRM4156, possibly VRM4155 etc too?)

It’s the dual-AGC thick film, part number CR711476, which I’m in need of to repair my radio and these sets all appear to use that part. Help with a board or suggestions where one, or the thick film, might be found would be very gratefully received.

Thanks.

Martin
G4NCE
Sparky67 is offline   Reply With Quote
Reply

Thread Tools



All times are GMT. The time now is 10:30 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.