UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Radio (domestic)

Notices

Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only.

Reply
 
Thread Tools
Old 9th Oct 2018, 10:56 pm   #41
julie_m
Dekatron
 
Join Date: May 2008
Location: Derby, UK.
Posts: 6,815
Default Re: Pilot Little Maestro Pilot Lamp Conversion

The problem with using X capacitors as voltage droppers is the self-healing and consequent loss of capacitance. Every switch-on surge (a cold valve heater, or a discharged capacitor, is almost a dead short circuit) tends to weaken the capacitor a bit until eventually there is insufficient power available and the circuit begins to misbehave, requiring replacement of the capacitor.

The company I used to work for did some tests and found it was better just to use a standard 400 or 630V capacitor, with a fusible resistor to limit the switch-on surge.
__________________
Julie {formerly known AJS_Derby}
julie_m is offline   Reply With Quote
Old 10th Oct 2018, 10:43 pm   #42
Sideband
Dekatron
 
Sideband's Avatar
 
Join Date: Oct 2003
Location: Croydon, Surrey, UK.
Posts: 4,899
Default Re: Pilot Little Maestro Pilot Lamp Conversion

What's happened to Kings? We still don't know for sure what the correct valve line-up is.
__________________
'And, in the end, the love you take is equal to the love you make'
The Beatles.
Sideband is online now   Reply With Quote
Old 11th Oct 2018, 3:25 am   #43
usradcoll1
Pentode
 
Join Date: Mar 2017
Location: Cedar Grove, Wisconsin, USA.
Posts: 203
Default Re: Pilot Little Maestro Pilot Lamp Conversion

Quote:
Originally Posted by Sideband View Post
What's happened to Kings? We still don't know for sure what the correct valve line-up is.
The correct valve line-up was specified in entry #16.
I'm surprised that the # 21 post was so incorrect! I'm rather familiar with this valve line-up.
It seems that Brimar was the main supplier of the US type valves used in the British built radios.
This really was an informative and interesting thread!
usradcoll1 is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 10:44 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.