UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Television and Video

Notices

Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc.

Reply
 
Thread Tools
Old 28th May 2019, 11:57 pm   #21
AC/HL
Moderator
 
AC/HL's Avatar
 
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 7,189
Default Re: CRT lost its tension band

Not pre-war, but one of my general duties early on was changing CRTs. No special precautions were taken, and this was the separate plate glass front screen days. Most went for re-gunning, but if disposal was needed we just knocked the pip off, no drama.
__________________
Bill, BVWS member
AC/HL is offline   Reply With Quote
Old 29th May 2019, 3:31 am   #22
Restoration73
Octode
 
Restoration73's Avatar
 
Join Date: Jun 2013
Location: Surbiton, SW London, UK.
Posts: 1,618
Default Re: CRT lost its tension band

If the tension band was integral to the tube, often an adhesive was used to prevent
movement. An example is the small 5" mono TVs, the crt has no band, but the
version of the crt that was fitted to the vehicle reversing cctv systems had a
non removable tension band, something I had only ever seen on large crts.
Restoration73 is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 9:39 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2019, Paul Stenning.