UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Success Stories

Notices

Success Stories If you have successfully repaired or restored a piece of equipment, why not write up what you did and post details here. Particularly if it was interesting, unusual or challenging. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Reply
 
Thread Tools
Old 5th Aug 2022, 4:41 pm   #1
stevehertz
Dekatron
 
stevehertz's Avatar
 
Join Date: Sep 2011
Location: Rugeley, Staffordshire, UK.
Posts: 7,273
Default New long wire AM aerial and switching box

I already have a long wire AM aerial feeding into my house for domestic radio use. Just recently, fed up with inadequate AM performance in my workshop I erected another long wire (it's a big garden) to feed that building. Usual techniques, a long length of insulated wire attached using egg insulators to two tall, strong trees and then down and into my workshop. Once inside the wire has the dual function of feeding a 'permanent' Tandberg stereo receiver setup that I listen to, and also any set that's 'on the bench'. I could have just fed the wire to both, but obviously that's not best practise as it's loading the aerial twice. So I just made a simple switching box using an old RS diecast box that I bought decades ago, as the housing. Ha, so many times in the past I've looked at that box and thought, "I'm never going to use that". Obviously, just a double throw switch inside. It all works fine and I can get Radio Caroline, not brilliantly, but I can receive it (I'm in Rugeley, Staffs). I haven't yet tested the aerial on a known, 'good quality' AM set so who knows, Caroline may even get better, up to listenable quality.
Attached Thumbnails
Click image for larger version

Name:	20220805_164520.jpg
Views:	114
Size:	81.9 KB
ID:	262258  
__________________
A digital radio is the latest thing, but a vintage wireless is forever..
stevehertz is offline   Reply With Quote
Old 5th Aug 2022, 5:52 pm   #2
Sideband
Dekatron
 
Sideband's Avatar
 
Join Date: Oct 2003
Location: Croydon, Surrey, UK.
Posts: 6,961
Default Re: New long wire AM aerial and switching box

You might be able to improve it even more by placing a 100pF variable cap in series with the aerial and tune for maximum. It may also be worth trying an ATU (Aerial Tuning Unit) which is a bit more complex using a coil tuned by a variable cap. Various designs can be found via Google
__________________
On Spike Milligan's headstone......I told you I was ill...
Sideband is offline   Reply With Quote
Old 5th Aug 2022, 7:03 pm   #3
Cruisin Marine
Heptode
 
Join Date: Jul 2018
Location: London, UK
Posts: 527
Default Re: New long wire AM aerial and switching box

Build a pi tank ATU and you will be able to peak it to hear almost anything. I would add an RF choke across the antenna terminals to discharge any static, a 2.5 mH or similar to protect you and your receivers, and disconnect the antenna and connect it to earth when storms approach. Best you have a decent earth stake nearby.

Last edited by Cruisin Marine; 5th Aug 2022 at 7:10 pm.
Cruisin Marine is online now   Reply With Quote
Reply

Thread Tools



All times are GMT. The time now is 11:07 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.