UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > General Vintage Technology Discussions

Notices

General Vintage Technology Discussions For general discussions about vintage radio and other vintage electronics etc.

Closed Thread
 
Thread Tools
Old 4th Dec 2017, 9:26 pm   #1
ITAM805
Nonode
 
ITAM805's Avatar
 
Join Date: Jul 2010
Location: Folkestone, Kent, UK.
Posts: 2,172
Default Header ID please

Can some put a name to this header please? The 15 pins are approximately 2.4mm apart, the overall length is 40mm and 3.8mm wide

many thanks
Attached Thumbnails
Click image for larger version

Name:	IMGP0071 (Large).jpg
Views:	110
Size:	35.0 KB
ID:	153369  
ITAM805 is offline  
Old 5th Dec 2017, 1:10 pm   #2
ITAM805
Nonode
 
ITAM805's Avatar
 
Join Date: Jul 2010
Location: Folkestone, Kent, UK.
Posts: 2,172
Default Re: Header ID please

I found Maplin do a strip of header pins of 2.54mm spacing, so that'll have to do, the cable block can be secured in with hot glue, hopefully
ITAM805 is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 2:13 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.