|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
14th Jul 2015, 6:29 pm | #1 |
No Longer a Member
Join Date: Dec 2007
Location: Bristol, Avon, UK.
Posts: 184
|
Avo multiminor mk5
I recently acquired an AVO multiminor,however while all ranges work ok, the movement is non linear, ie 12v reads 10v on 25v range,but at fsd its bang on, all ranges read low until about 3/4 scale when the error disappears, there does not seem to be any visible mechanical damage,any body have any suggestions?
|
14th Jul 2015, 8:38 pm | #2 |
Dekatron
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 9,642
|
Re: Avo multiminor mk5
A similar problem in an earlier thread was caused by magnetic particles in the coil gap (probably from PMM or Phil G4SPZ?)
|