|
Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only. |
|
Thread Tools |
15th Jan 2012, 5:58 pm | #1 |
Pentode
Join Date: Mar 2010
Location: Clacton On Sea, Essex, UK.
Posts: 184
|
Bush AC11 replacement speaker help
Hi guys, does anyone know what size and impedance speaker I need to replace my old bracking up Celestion speaker in the Bush AC11 valve set? Many thanks Mike
|
15th Jan 2012, 6:38 pm | #2 |
Octode
Join Date: Mar 2011
Location: Sheffield, South Yorkshire, UK.
Posts: 1,453
|
Re: Bush ac11 replacement speaker help
8" 2.5 ohm.
- Joe |
15th Jan 2012, 7:07 pm | #3 |
Pentode
Join Date: Mar 2010
Location: Clacton On Sea, Essex, UK.
Posts: 184
|
Re: Bush ac11 replacement speaker help
Hi thanks for the advice any idea where I can get one cheers mike
|
15th Jan 2012, 7:16 pm | #4 |
Octode
Join Date: Mar 2011
Location: Sheffield, South Yorkshire, UK.
Posts: 1,453
|
Re: Bush ac11 replacement speaker help
A scrap set is the obvious place.
If you got hold of one which is a bit smaller you could adapt the mounting arrangements to suit. You can always try a 'Wanted' post on here. - Joe |
15th Jan 2012, 7:19 pm | #5 |
Pentode
Join Date: Mar 2010
Location: Clacton On Sea, Essex, UK.
Posts: 184
|
Re: Bush ac11 replacement speaker help
Hi, yeah thanks I will try that cheers, Mike.
|