UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Hints, Tips and Solutions (Do NOT post requests for help here)

Notices

Hints, Tips and Solutions (Do NOT post requests for help here) If you have any useful general hints and tips for vintage technology repair and restoration, please share them here. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Reply
 
Thread Tools
Old 22nd May 2018, 7:47 pm   #1
k_yller
Pentode
 
Join Date: Jan 2014
Location: Huddersfield, West Yorkshire, UK.
Posts: 109
Default Cold Toner Transfer for PCB Making

Hi
interesting solution
http://www.instructables.com/id/Heat...or-PCB-Making/
already tested with good results
I'm using mixture of PVC cleaner (acetone based) + IPA
k_yller is offline   Reply With Quote
Old 18th Nov 2018, 10:40 pm   #2
FrankB
Hexode
 
Join Date: Oct 2005
Location: Olympia, Washington, USA.
Posts: 395
Default Re: Cold Toner Transfer for PCB Making

A Sharpie brand black marker or India ink work well too. They are asphalt based I am given to understand.
Both worked fine for me, and a Sharpie marker, fine point ot extra fine is only around a buck.
FrankB is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 9:45 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.