|
Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc. |
|
Thread Tools |
13th Dec 2014, 7:41 pm | #21 |
Dekatron
Join Date: Aug 2007
Location: W.Butterwick, near Doncaster UK.
Posts: 8,935
|
Re: Hall IC Drum Motor SL-F30 Replacement
Good result.
__________________
G8JET BVWS Archivist and Member V.M.A.R.S |
13th Dec 2014, 8:31 pm | #22 |
Pentode
Join Date: Jun 2011
Location: San Martino di Lupari, Veneto, Italy.
Posts: 204
|
Re: Hall IC Drum Motor SL-F30 Replacement
When soldering the IC, i bent the pin of IC
without the use of the glue. Libra |
17th Dec 2014, 1:31 pm | #23 |
Hexode
Join Date: Feb 2012
Location: Lowestoft, Suffolk, UK.
Posts: 256
|
Re: Hall IC Drum Motor SL-F30 Replacement
Nice one.
I have yet to have one fail after replacing it. The glue I feel IS the issue there. ...........Kev |
17th Dec 2014, 1:39 pm | #24 |
Dekatron
Join Date: Jan 2005
Location: Oxford, UK.
Posts: 17,864
|
Re: Hall IC Drum Motor SL-F30 Replacement
Well done!
|
17th Dec 2014, 3:47 pm | #25 |
Pentode
Join Date: Jun 2011
Location: San Martino di Lupari, Veneto, Italy.
Posts: 204
|
Re: Hall IC Drum Motor SL-F30 Replacement
Thanks Guys.
Libra |
25th Jun 2015, 4:42 am | #26 |
Heptode
Join Date: Mar 2015
Location: Lefkada, Greece
Posts: 969
|
Re: Hall IC Drum Motor SL-F30 Replacement
The glue gets conductive with age and that causes shorts. That's why the hall sensor didn't work. You can watch this youtube video so you can see the problem:
https://www.youtube.com/watch?v=vt2MO1ScbPM |