|
Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc. |
|
Thread Tools |
27th Dec 2009, 9:48 am | #1 |
Octode
Join Date: Jul 2006
Location: Solihull, West Midlands and Beaford, Devon
Posts: 1,626
|
Beau Decca TVs
This is probably a long shot and I'm not really sure of what I'm asking myself, but does anyone know anything regarding the history of Beau Decca TVs? Of the three that I've seen in the flesh, no two seem exactly the same. Two of the sets had rubber masks whilst the other had a gold coloured plastic mask. Two of the sets had the station-name legends on the radio facing horizontally and the other had the legends layed out vertically (so you have to crick your neck to read them). On examination of the main TV chassis (IF, frame, line etc.) of 2 sets, there were about 5% more components on one of them than the other and the circuits obviously were not the same. I've never seen a schematic or any kind of service manual for one, and I've not spoken to anyone who has ever seen one either. Did they make a service manual for the set (and does anyone have a spare one I could borrow? ) Were they similar to anything else? I'm guessing not, but I thought somebody may know something.
Thanks everyone. Kind regards. From Mike.
__________________
G7TRF |
27th Dec 2009, 12:03 pm | #2 |
Triode
Join Date: Oct 2005
Location: Nottingham
Posts: 2
|
Re: Beau Decca TVs
Hi Mike, You have a PM
Best regards, John. |
27th Dec 2009, 12:12 pm | #3 |
Dekatron
Join Date: Jun 2005
Location: Warnham, West Sussex. 10 miles south of DORKING.
Posts: 9,147
|
Re: Beau Decca TVs
Hello Mike,
As far as I am aware all the Decca television receivers from the D17 back to 1946 were made for Decca by the Plessey Company. This includes all the projection receivers including the Beau Decca and 1000 series. Plessey were not married to a valve manufacturer and this is probably why you see such an odd mix of Mazda and Mullard valves in Plessey/Decca receivers. Mains transformers were often wound for a variety of tube heater voltages and most tubes available at the time could have been used in their chassis. Service manuals must have been available for the 1947 mirror receiver but knowing Decca it probably went through a few design changes without notification to the dealers. This may account for the differences. I believe the DM14 series [Decca Manufactired?] were the first models to be actually designed and built by Decca engineers. Nice receivers and very rare. Regards, John. |
27th Dec 2009, 12:54 pm | #4 |
Octode
Join Date: Jul 2006
Location: Solihull, West Midlands and Beaford, Devon
Posts: 1,626
|
Re: Beau Decca TVs
Thanks John and John for the information. The set I'm working on is one that I owned for a little while but unfortunately, in a fit of gloominess, I gave away to a good pal of mine. I'm hoping to get the set working before he comes to take it away. (Or hoping he says it's too big or scruffy for his nice house.)
__________________
G7TRF |
27th Dec 2009, 1:04 pm | #5 | |
Moderator
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,289
|
Re: Beau Decca TVs
Quote:
PMs have their place for example in negotiating sales, or sending private information like home addresses, email addresses and phone numbers. They should not be used as a substitute for posting in the forums though.
__________________
Graham. Forum Moderator Reach for your meter before you reach for your soldering iron. |
|
27th Dec 2009, 1:37 pm | #6 |
Triode
Join Date: Oct 2005
Location: Nottingham
Posts: 2
|
Re: Beau Decca TVs
Hi, I have the manual for the Beau Decca Mirror lid TV stored in my computer as a pdf file, so if any other members would like a copy contact me with your E mail address and and then I can forward it on to you.
Best regards, John. |
27th Dec 2009, 1:40 pm | #7 |
Moderator
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,289
|
Re: Beau Decca TVs
Thanks John.
That's a kind offer.
__________________
Graham. Forum Moderator Reach for your meter before you reach for your soldering iron. |