UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment

Notices

Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Closed Thread
 
Thread Tools
Old 19th Sep 2020, 1:06 pm   #1
stuartfurbank
Triode
 
Join Date: Aug 2007
Location: Altrincham, Greater Manchester, UK.
Posts: 31
Default Army Standard Signal Gen. no1 (Marconi TF144G?)

Hello Group,
Help needed
Does anybody out there know which valves should be in “Cases Spare Parts No.21” WY3172.
There are 3 valve size recessed slots in the box which I presume should contain valves for the above sig. Gen., but not sure which ones.
I assume Standard Signal Generator No.1 is a Marconi TF144G?
All help appreciated.
Stuart. M6AVC VMARS & BVWS member.
stuartfurbank is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 6:15 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.