|
Other Vintage Household Electrical or Electromechanical Items For discussions about other vintage (over 25 years old) electrical and electromechanical household items. See the sticky thread for details. |
|
Thread Tools |
16th Oct 2010, 8:35 am | #101 | |
Retired Dormant Member
Join Date: Oct 2010
Location: Colne, Lancashire, UK.
Posts: 527
|
Re: Award for the worst plug design goes to...
Quote:
|
|
16th Oct 2010, 8:14 pm | #102 |
Octode
Join Date: Jan 2006
Location: Borough of Gateshead, UK.
Posts: 1,420
|
Re: Award for the worst plug design goes to...
I was reminded of a horrible "slimline" 13A plug design I recall seeing in 1977 when brand new, hence fairly recent. Can't recall the manufacturer.
They were a thin-ish plastic design one could bend easilly. The cover was held by two screws at each end. Although satisfactory for the average thin flexed appliance, ignoring the fact the plugs were difficult to remove from the socket, the main trouble was, if a thick mains lead was used the body tended to bend as the cord grips were tightened with the result 1). It was difficult to replace the top cover and 2). It didn't fit too well into the wall socket! I think they were rapidly discontinued when these problems came to light! Brian |
16th Oct 2010, 10:31 pm | #103 | |
Hexode
Join Date: May 2010
Location: Coventry, Warwickshire, UK
Posts: 374
|
Re: Award for the worst plug design goes to...
Quote:
if it is they are still going today. http://www.legrand.co.uk Jan |
|
17th Oct 2010, 1:02 pm | #104 |
Dekatron
Join Date: Mar 2008
Location: St. Frajou, l'Isle en Dodon, Haute Garonne, France.(Previously: Ellesmere Port, Cheshire, UK.)
Posts: 3,184
|
Re: Award for the worst plug design goes to...
Hi,
They were made by Legrand but I've got one marked BICC (British Insulated Callenders Cables). They were often sold by local electricity boards and bore their logo on the back. The one I've got here is from MANWEB (Merseyside And North Wales Electricity Board). Maybe someone has collected each of the boards? Cheers de Pete
__________________
"Hello?, Yes, I'm on the train, I might lose the signal soon as we're just going into a tunn..." |
5th Dec 2010, 11:24 am | #105 |
Rest in Peace
Join Date: Apr 2008
Location: London, UK.
Posts: 2,508
|
Re: Award for the worst plug design goes to...
Here come the Kliegls...
These four 1-inch sockets are on the side of a dimmer. The plug is a rectangular block with contacts either side. My finger is on the live contact, the neutral is opposite it (at the top). I've just found a 1/2-inch extension which I'll take some pics of to show how you can hold it by the live terminals. Lucien |
6th Dec 2010, 2:58 pm | #106 |
Dekatron
Join Date: Mar 2008
Location: St. Frajou, l'Isle en Dodon, Haute Garonne, France.(Previously: Ellesmere Port, Cheshire, UK.)
Posts: 3,184
|
Re: Award for the worst plug design goes to...
Ouch and no shutters either!
Does that conform to ANY standards? How may thousands of amps is it rated for? Cheers, Pete
__________________
"Hello?, Yes, I'm on the train, I might lose the signal soon as we're just going into a tunn..." |
6th Dec 2010, 5:07 pm | #107 |
Dekatron
Join Date: May 2008
Location: Derby, UK.
Posts: 7,735
|
Re: Award for the worst plug design goes to...
That looks like the sort of thing people don't complain about, because if anyone ever had cause to complain, then there would not enough of them left to say much!
__________________
If I have seen further than others, it is because I was standing on a pile of failed experiments. |
6th Dec 2010, 5:43 pm | #108 |
Guest
Posts: n/a
|
Re: Award for the worst plug design goes to...
Obviously someone is trying ot accelerate darwinism.
|
7th Dec 2010, 12:42 am | #109 | |
Dekatron
Join Date: Jan 2003
Location: Bradford on Avon, Wiltshire, UK.
Posts: 3,310
|
Re: Award for the worst plug design goes to...
Quote:
I have a few of these(a British Aerospace and a BBC one) with unsleeved, and sleeved pins, so they must have made quite a few of them!
__________________
"Nothing is as dangerous as being too modern;one is apt to grow old fashioned quite suddenly." |
|
7th Dec 2010, 6:58 pm | #110 |
Retired Dormant Member
Join Date: May 2008
Location: Ellesmere, Shropshire, UK.
Posts: 188
|
Re: Award for the worst plug design goes to...
Hello Tim et al,
In their defence, the BBC slim 13A plug was very useful on a soldering iron in a crowded hand toolkit - I don't know how it might have been with a thick cable but used sensibly it was fine. All plugs had unsheathed pins and personally I never knew of any trouble with that. Indeed, I once used a nailfile - very carefully - to blow a ringmain fuse to allow me to get some rest and it worked beautifully but I couldn't have done it now! Regards Ant |
7th Dec 2010, 8:57 pm | #111 |
Dekatron
Join Date: Mar 2008
Location: St. Frajou, l'Isle en Dodon, Haute Garonne, France.(Previously: Ellesmere Port, Cheshire, UK.)
Posts: 3,184
|
Re: Award for the worst plug design goes to...
Not much left of the nailfile, I'll wager. Reminds me of a guy I worked with who went on a residential course and was bothered by a persistently loud radio in the room nextdoor. Solution? A plug with the earth a neutral pin wired together. Shoved into a socket in his room and "pop", off went the RCD. Instant bliss. Until it was reset.
"Pop" . . . Cheers, Pete
__________________
"Hello?, Yes, I'm on the train, I might lose the signal soon as we're just going into a tunn..." |
7th Dec 2010, 9:36 pm | #112 |
Dekatron
Join Date: Feb 2007
Location: Leominster, Herefordshire, UK.
Posts: 16,536
|
Re: Award for the worst plug design goes to...
There's a certain elegance to the nailfile trick- probably no damage to anything other than the plug and file, which wouldn't be the case if a shorted plug was inserted "hot" or inserted and the socket switch operated
__________________
....__________ ....|____||__|__\_____ .=.| _---\__|__|_---_|. .........O..Chris....O |
8th Dec 2010, 12:17 am | #113 |
Retired Dormant Member
Join Date: May 2008
Location: Ellesmere, Shropshire, UK.
Posts: 188
|
Re: Award for the worst plug design goes to...
Hello Herald et al,
That's what I did - held the nailfile firmly in place then operated the switch. No tell-tale at all! That was a radio too, perhaps it was deliberate as I'd had a discussion with the landlady about breakfast - she felt that Mass was more important. I prevailed but it was so scrappy and burned that I changed my mind about confessing and offering to mend the fuse! Sorry Mods, I'll shut up now... Regards Ant |
8th Dec 2010, 9:31 pm | #114 |
Octode
Join Date: Apr 2009
Location: Aylesbury, Buckinghamshire, UK.
Posts: 1,522
|
Re: Award for the worst plug design goes to...
Had to make up some 28 way umbilicals recently for a hydraulic pack, see photo. Using Cannon Trident connectors, you have to remember to fit the backshell and locking ring first. The rub is that the connector is numbered (lettered actually) from the outside inwards whereas the cable is numbered from the inside outwards.
Luckily in this instance the core allocation didn't matter, though I did have a job convincing the lads on site I hadn't made up the allocation schedule. Rob.
__________________
We have done so much, for so long, with so little, we are now qualified to do anything with nothing. |
11th Dec 2010, 7:34 pm | #115 |
Dekatron
Join Date: Nov 2003
Location: Near Leeds, West Yorkshire, UK
Posts: 4,609
|
Re: Award for the worst plug design goes to...
I think it's time to pull the plug on this thread.
__________________
Mike. |