|
Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here. |
|
Thread Tools |
3rd Apr 2006, 2:13 pm | #1 |
Dekatron
Join Date: Oct 2003
Location: Croydon, Surrey, UK.
Posts: 7,572
|
Cleaning copper cans; Philips Superinductance set.
Hi Guys.
I am just starting to work on a Philips Superinductance set (274A) from 1934. It's in excellent condition with just a carpet of dust on the top deck. It's cleaned up very well but there is some dust and dirt stuck on the top of the copper coil cans. These cans are not bright smooth and have a rough surface. I think some sort of clear cleaner or even foam cleaner would be ok but it would then need to be brushed off. Anybody got any ideas on how to tackle these? Does anyone know if it's possible to just remove the cans, leaving the coils in situ or do you have to remove the whole assembly and then remove the can from the coil? The object is to disturb as little as possible. It's the first set of this type I have tackled and I intend to rebuild all the paper capacitors and the two electrolytics to maintain original looks. I've included a couple of pictures.
__________________
There are lots of brilliant keyboard players and then there is Rick Wakeman..... |
3rd Apr 2006, 3:34 pm | #2 |
Pentode
Join Date: Oct 2004
Location: Hellendoorn, Netherlands
Posts: 137
|
Re: Cleaning copper cans Philips Superinductance set.
Hello Richard.
Please try not remove these can's! By using a copper/ brass-brush (=spark- brush)(toothbrush size) your problem is solved in just 1 minute. A vacuum-cleaner can help to catch the dust,during your brush session. (Copper dust in your nose is not a pleasant experience.) Succes guaranteed!! |
4th Apr 2006, 10:15 am | #3 |
Dekatron
Join Date: Oct 2003
Location: Croydon, Surrey, UK.
Posts: 7,572
|
Re: Cleaning copper cans Philips Superinductance set.
Thanks Ben.
I didn't want to remove the coils anyway! The spark-plug brush sounds a good idea so I'll get scrubbing....should have thought of something like that myself! The next major job to tackle is the rebuild of the capacitor block mounted under the chassis.....but thats another thread Rich.
__________________
There are lots of brilliant keyboard players and then there is Rick Wakeman..... Last edited by Darren-UK; 28th Aug 2007 at 4:06 pm. Reason: Somewhat OT question removed. |
5th Apr 2006, 2:33 am | #4 |
Diode
Join Date: Feb 2006
Location: Monteith, Ontario, Canada
Posts: 6
|
Re: Cleaning copper cans Philips Superinductance set.
Just a thought here ... those battery powered oscillating toothbrushes sell over here pretty cheap - about $10-$12. Toothpaste is a slightly abrasive polishing compound ... the moistness of the toothpaste should keep the dust to a minimum ...
Ok - a bit nuts, but worth a try? |
5th Apr 2006, 9:28 am | #5 |
Heptode
Join Date: Nov 2003
Location: East London, UK.
Posts: 761
|
Re: Cleaning copper cans Philips Superinductance set.
The copper bottoms on my saucepans come up a treat with BarKeepers Friend http://www.homecareproducts.co.uk/bkf.htm available in supermarkets and hardware stores so I just had a quick go at one of the cans in my 830A - pic attached - problem is now I'll have to finish the job or leave it alone for another seventy years to tarnish over again
I've just noticed a link to Copper Glo on the above web page so that might be worth investigating or I'm sure a quick glance along the cleaning products in your local supermarket will find other suitable products. Alvin Alvin |
14th Apr 2006, 9:59 pm | #6 |
Pentode
Join Date: Oct 2004
Location: Hellendoorn, Netherlands
Posts: 137
|
Re: Cleaning copper cans Philips Superinductance set.
The problem is ,there are used two kinds of copper coilcan's in Philips radio's:
A)rough copper cans. B)shiny polished copper cans. To clean the rough can's there is no better& faster solution that the brass-brush.By using polish there will stay allways a residu in the roughbrass that makes the result mostly even worse. The polished copper can can be cleaned up first with the brass brush (or steel-wool) allso: It's alway's a fast and good first-aid.Aftherworth's you have to polish these can's with commandant nr 4 or any other polish you like,to bring back the nice shiny look. |
14th Apr 2006, 10:26 pm | #7 |
Dekatron
Join Date: Oct 2003
Location: Croydon, Surrey, UK.
Posts: 7,572
|
Re: Cleaning copper cans Philips Superinductance set.
Hi Ben.
The copper brush idea worked a treat . The cans cleaned up very well. The rest of the chassis is pretty good and just required superficial cleaning. Now starting on the re-build. Rich.
__________________
There are lots of brilliant keyboard players and then there is Rick Wakeman..... |
15th Apr 2006, 12:19 am | #8 |
Retired Dormant Member
Join Date: Dec 2005
Posts: 9
|
Re: Cleaning copper cans Philips Superinductance set.
Hi
If these cans can be removed a mixture of salt and vinegar is pretty effective in cleaning copper. Obviously it would be necessary to varnish them afterwards to prevent natural oxidation. Les. |