|
Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment. |
|
Thread Tools |
26th Jul 2019, 7:17 pm | #1 |
Hexode
Join Date: Mar 2009
Location: Cirencester, Gloucestershire, UK.
Posts: 391
|
Industrial Tool and Die Works model 6000-A radio schematic
Hello All
I wonder if anyone has a readable scan of the schematic for the model 6000-A radio, a US-produced ‘morale’ radio produced by the Industrial Tool and Die Works in Minneapolis towards the end of the war? I’ve found an indistinct scan which is all but unreadable, but a better one would be very useful to me. The schematic, along with a station log, was housed in the lid of the radio, but it’s missing from mine. There’s a description of the model 6000-BAC, which seems to be a later version of the radio, incorporating mains and battery switching at: https://people.ohio.edu/postr/bapix/6000-BAC.htm And a readable schematic of this model can be found on the www, but I can’t find one for the 6000-A. Many thanks for any help you can give me. Best regards … Stef |
30th Jul 2019, 4:04 pm | #2 |
Octode
Join Date: Oct 2008
Location: Littlehampton, West Sussex, UK.
Posts: 1,465
|
Re: Industrial Tool and Die Works model 6000-A radio schematic
I repaired an A some years ago for someone but couldn’t find a circuit diagram then. I did however keep 3 photos of the set which I will pass to you if they would be any help. If you would like them please forward an email address by PM so that I can send better quality pictures.
Jim |
2nd Aug 2019, 9:20 am | #3 |
Octode
Join Date: Oct 2008
Location: Littlehampton, West Sussex, UK.
Posts: 1,465
|
Re: Industrial Tool and Die Works model 6000-A radio schematic
Larger pictures to Stef and 3 Pictures here in case anyone else recognises the receiver.
Jim |