|
Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here. |
|
Thread Tools |
1st Feb 2020, 10:46 pm | #1 |
Hexode
Join Date: May 2009
Location: Ryde, Isle of Wight, UK.
Posts: 419
|
Dull flat Cabinet.
I am doing some light restoration to a Bush Radio, and need some advice on the Cabinet.
The Cabinet is in fairly good condition, but the varnish is just dull and Flat, I don't really want to get involved into stripping of all the old varnish, so I was recommended a wax polish called Gibsons, but its £30 a jar ! Any suggestions for a alternative. And I also need to remove the existing Bush Logo transfer and replace it with the new one obtained from David G4EBT.( Many thanks David ) Soaking it off would be the obvious method, but not really practical on a wireless cabinet, any suggestions. Ken, G6HZG.
__________________
Life is not Hollywood, life is Cricklewood. |
2nd Feb 2020, 12:54 am | #2 |
Octode
Join Date: Jul 2017
Location: Newcastle Upon Tyne, Tyne & Wear, UK.
Posts: 1,181
|
Re: Dull flat Cabinet.
T-Cut works really well when it comes to bringing up old cabinets. Then you can use some wax.
|