UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Repair and Restoration Services Wanted

Notices

Repair and Restoration Services Wanted If you need someone to repair or restore equipment for you please post your request here.

Reply
 
Thread Tools
Old 23rd Feb 2019, 4:03 pm   #1
Andrew64
Tetrode
 
Andrew64's Avatar
 
Join Date: Jan 2016
Location: Ramsgate, Kent, UK.
Posts: 85
Default Small DC motor Armature rewind & skim.

I am looking for someone to rewind and skim the commutator of this 12v 3 segment commutator armature. This is from an Akai GX77 reel to reel tape deck so perhaps a balance as well to keep vibrations to a minimum.

The fault is one of the coils is low ohms and overheated, I suspect this occurred from new or shortly thereafter. The motor has been run in this condition for a while causing some spark erosion to the commutator apart from this the commutator has little wear.

If anybody can or knows of someone or company who can do this please let me know, I would be most grateful.
Attached Thumbnails
Click image for larger version

Name:	capatan motor armature.jpg
Views:	90
Size:	38.1 KB
ID:	178916  
__________________
Andrew

Illegitimi non carborundum
Andrew64 is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 5:06 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.