UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Where To Get Sets and Parts

Notices

Where To Get Sets and Parts For discussions about swapmeets, rallies, NVCF and BVWS, car boot sales, antique and charity shops, dealers, newspaper adverts, the local tip and just about any other source of equipment (other than eBay).

Reply
 
Thread Tools
Old 19th Feb 2019, 3:00 pm   #1
John10b
Octode
 
Join Date: Nov 2016
Location: Aberaeron, Ceredigion, Wales, UK.
Posts: 1,027
Default Potentiometers with or without switch

If you require new volume or tone controls with or without switch Blore Edwards can supply, even custom made to fit vintage Radios and Record Players etc.
They will supply one off, typical price seems to be £7.
They are based in South Wales, tel. 01685882043, or search for the name.
I spoke to Brett very helpful, I should say I have no connection with this company.
Cheers
John
John10b is offline   Reply With Quote
Old 19th Feb 2019, 3:43 pm   #2
BRASSBITS
Pentode
 
Join Date: Dec 2018
Location: Sheffield, South Yorkshire, UK.
Posts: 101
Default Re: Potentiometers with or without switch

thanks for that very useful
BRASSBITS is online now   Reply With Quote
Old 22nd Feb 2019, 4:09 pm   #3
Paul Stenning
Administrator
 
Paul Stenning's Avatar
 
Join Date: Dec 2002
Location: Cardiff
Posts: 7,258
Default Re: Potentiometers with or without switch

https://www.blore-ed.com/
__________________

Paul Stenning
Forum Admin/Owner and BVWS Committee Member
Paul Stenning is offline   Reply With Quote
Old 22nd Mar 2019, 4:10 pm   #4
John10b
Octode
 
Join Date: Nov 2016
Location: Aberaeron, Ceredigion, Wales, UK.
Posts: 1,027
Default Re: Potentiometers with or without switch

Received the Log pots with switch from above. I canít understand why rs and others donít supply these, they are just right for vintage Radios and Record Players. Fortunately you can order direct.
Cheers
John
John10b is offline   Reply With Quote
Old 27th Mar 2019, 12:59 pm   #5
RF Burn
Pentode
 
RF Burn's Avatar
 
Join Date: Apr 2008
Location: Ramsgate, Kent, UK.
Posts: 208
Default Re: Potentiometers with or without switch

Nice, this company supplies the old AB style carbon & W/W pots and the meaty old Colvern style W/W pots, which were fairly standard parts in most electronics catalogues in the past. Even the unobtainium Log/AntiLog dual gangs can be made to order.

RF Burn is offline   Reply With Quote
Old 27th Mar 2019, 2:59 pm   #6
John10b
Octode
 
Join Date: Nov 2016
Location: Aberaeron, Ceredigion, Wales, UK.
Posts: 1,027
Default Re: Potentiometers with or without switch

I agree with you, and Brett who I spoke with is very helpful.
Cheers
John
John10b is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 3:45 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2019, Paul Stenning.