|
Homebrew Equipment A place to show, design and discuss the weird and wonderful electronic creations from the hands of individual members. |
|
Thread Tools |
22nd Apr 2019, 8:26 am | #1 |
Hexode
Join Date: May 2009
Location: Ryde, Isle of Wight, UK.
Posts: 419
|
Home brew ATU
I intend to build a home brew aerial tuning unit for my home brew 80M AM TX O/P about 13 watts max.
I cant, find any suitable metal cases for it under £28, would it be acceptable to use plastic,or is screening of the ATU that important? I vaguely remember the ATU for the Joystick aeril in the 60`s being plastic. 73`s Ken G6HZG
__________________
Life is not Hollywood, life is Cricklewood. |
22nd Apr 2019, 9:15 am | #2 |
Moderator
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,876
|
Re: Home brew atu
THe ATU can be an easy ingress route for domestic interference on receive. A metal case is wanted more than ever nowadays.
On transmit, to keep losses low, the cabinet needs to be big enough to be well spaced from inductors. Balanced antennae are better for dodging interference, and they work best with a dedicated balanced ATU. Be sure you build an ATU suited to your antenna (I got this wrong and built a tour-de-force ATU that would win any construction competition, and I've never used it in anger!) David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done |
22nd Apr 2019, 6:51 pm | #3 |
Hexode
Join Date: May 2009
Location: Ryde, Isle of Wight, UK.
Posts: 419
|
Re: Home brew ATU
I think, buying some aluminum sheet and making a case is the way to go.
__________________
Life is not Hollywood, life is Cricklewood. |
22nd Apr 2019, 7:20 pm | #4 |
Guest
Posts: n/a
|
Re: Home brew ATU
A big biscuit tin?
|
22nd Apr 2019, 7:41 pm | #5 |
Dekatron
Join Date: Apr 2012
Location: Wiltshire, UK.
Posts: 13,998
|
Re: Home brew ATU
In the past I've used large plastic industrial IP68-rated enclosures but had them 'metal-sprayed' inside for screening [this is the modern version of the metallising used on valve-envelopes in the 30s and 40s].
The metal-spraying provides electrostatic screening but by virtue of being both non-magnetic and of a relatively high resistance it avoids the whole 'shorted-turn' or 'ferrite slug' detuning effects (which can sometimes be rather spectacular if you're running a couple of Kilowatts of RF up the spout). |
23rd Apr 2019, 7:16 am | #6 |
Hexode
Join Date: May 2009
Location: Ryde, Isle of Wight, UK.
Posts: 419
|
Re: Home brew ATU
Did think about a Biscuit Tin,but all this years Xmas assortment came in plastic containers.
I was also thinking about a IP65/68 enclosure and lining it with thin aluminium or tin plate. Once upon a time, 10/6d in your pocket and a little swaray down Tottenham Crt Rd or Soho`s Lisle Street, had your chassis and cabinet sorted. You could even purchase one of those Artistic Magazines for the more discerning Gent, while there. Ken, G6HZG.
__________________
Life is not Hollywood, life is Cricklewood. |
23rd Apr 2019, 4:15 pm | #7 |
Rest in Peace
Join Date: Jun 2003
Location: Newcastle, Tyne and Wear, UK.
Posts: 188
|
Re: Home brew ATU
I have N.O.S steel case 12" x 7" x 8" w x h x d if not too big.
Mike |
24th Apr 2019, 7:13 am | #8 |
Hexode
Join Date: May 2009
Location: Ryde, Isle of Wight, UK.
Posts: 419
|
Re: Home brew ATU
Mikeymusyradio,
metal box on offer sound ok, I have sent you a private message, thanks Ken
__________________
Life is not Hollywood, life is Cricklewood. |
25th Apr 2019, 11:27 am | #9 |
Rest in Peace
Join Date: Jun 2003
Location: Newcastle, Tyne and Wear, UK.
Posts: 188
|
Re: Home brew ATU
Hi Ken
No P.M. at this end yet, just spotted your response. Mike |
3rd May 2019, 7:47 am | #10 |
Retired Dormant Member
Join Date: Feb 2010
Location: Hull, East Riding of Yorkshire, UK.
Posts: 25
|
Re: Home brew ATU
I use 50mm adhesive copper tape for screening and veroboard ground plane..about £3.50 per roll
|
3rd May 2019, 1:38 pm | #11 |
Heptode
Join Date: May 2015
Location: Bradford, West Yorkshire, UK.
Posts: 512
|
Re: Home brew ATU
Make the entire box out of ds copper clad board?
__________________
worried about the electrons entering the circuit and the smoke leaving Andrew |