|
General Vintage Technology Discussions For general discussions about vintage radio and other vintage electronics etc. |
|
Thread Tools |
30th Nov 2011, 10:18 pm | #1 |
Heptode
Join Date: Jan 2004
Location: Blyth, Northumberland, UK.
Posts: 858
|
What is this item for?
I pulled this out of a skip some time ago, even though I don't need it, i'd like to know what its for as I'm considering getting rid.
Its a generator of some description, permanent magnet I presume as it needs no exiter current. At approximately 1 RPM the output at the back appears to be from 170 to 210 Volts DC. If you really go for it then you can produce up to 500Volts. The connector on the back for some reason is terminated to a 3-pin 2a round pin lighting socket. Housed in a home-made cut and riveted (proper rivets, hammered flat) and screwed to a wooden base with rubber feet. The handle doesn't give much away, but I can't help but think that it looks 'aircraft-y'. The Drive is on a ratchet, it turns the generator when rotated clockwise, slips when rotated anticlockwise. Any advice appreciated. Dave. |
30th Nov 2011, 10:29 pm | #2 |
Retired Dormant Member
Join Date: Apr 2008
Location: Banffshire, Scotland, UK.
Posts: 191
|
Re: What is this item for?
It could be a ringing generator from a line test set used in a small telephone exchange, they could give you a nasty shock if you happened to be working on a line when somebody else wound the thing up, however If I remember correctly the main dynamotor ringing generators that started automatically when ever a call was initated shoved out in the region of 100v but of course with a hand cranked one that did not apply
regards val33vo |
30th Nov 2011, 10:37 pm | #3 |
Heptode
Join Date: Mar 2008
Location: Forest of Dean, Gloucestershire, UK.
Posts: 648
|
Re: What is this item for?
Is the yellow paint not a clue? It looks to me like the hand generator from a dinghy radio. British T-1333 perhaps (see 1/2 way down the page here).
Hugh Last edited by Stockden; 30th Nov 2011 at 10:38 pm. Reason: bracket missing |
30th Nov 2011, 10:54 pm | #4 |
Heptode
Join Date: Jan 2004
Location: Blyth, Northumberland, UK.
Posts: 858
|
Re: What is this item for?
Thank you val33vo and Hugh,
On close inspection it looks exactly like the generator in that box, right down the rivets on the handle and the ribs on the wheel. The 3 outputs on the back tie in with what is stated on the website. I didn't realise it was that old, I would have put it at 60's or 70's. Is this generator likely to be of any specific interest to anyone or shall I offer it through the usual channels? Thanks, Dave. |
30th Nov 2011, 11:06 pm | #5 |
Pentode
Join Date: Jul 2010
Location: Leyland, Nr. Preston, Lancashire, UK.
Posts: 191
|
Re: What is this item for?
Would I be able to use it in the field of telephony? I'll drop you a PM.
__________________
"And what on earth are you going to do with that?" |
30th Nov 2011, 11:10 pm | #6 |
Heptode
Join Date: Jan 2004
Location: Blyth, Northumberland, UK.
Posts: 858
|
Re: What is this item for?
|
30th Nov 2011, 11:18 pm | #7 | ||
Pentode
Join Date: Jul 2010
Location: Leyland, Nr. Preston, Lancashire, UK.
Posts: 191
|
Re: What is this item for?
Quote:
Quote:
__________________
"And what on earth are you going to do with that?" Last edited by Jim_746; 30th Nov 2011 at 11:23 pm. Reason: Added specs from wftw.nl/gibsongirl/gibsongirl.html. |
||
30th Nov 2011, 11:54 pm | #8 |
Retired Dormant Member
Join Date: Mar 2008
Location: Hampshire, UK.
Posts: 297
|
Re: What is this item for?
Looks like a generator for HT and LT - I have one somewhere - that was used to operate a wireless set - possibly the 38 or similar. There should be two separate outputs if so, for the HT and LT.
It is also possible to modify to a rotary converter if it is this type by removing the gearbox and using the LT section as the "motor". The handle has a left-handed thread on mine! Roy |