|
Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here. |
|
Thread Tools |
23rd Oct 2009, 10:08 am | #1 |
Rest in Peace
Join Date: Mar 2006
Location: N.W. Oxfordshire(Chipping Norton)
Posts: 7,306
|
Using Acetates to recreate dial markings
I'm sure that somewhere on this forum there's a thread explaining how to do this, but I can't find it. What I want to do is print as accurate a copy of a Ferranti U1015 dial as possible onto an acetate, then transfer or attach it to the original glass scale, which has lost some of it's markings, so how do I go about this? I would be using a HP deskjet printer, and typing in a scale in Wordpad.
|
23rd Oct 2009, 2:43 pm | #2 |
Octode
Join Date: Jun 2004
Location: Hampton Vale, Peterborough, UK.
Posts: 1,698
|
Re: Using Acetates to recreate dial markings
Here's one location - there may be more:
https://www.vintage-radio.net/forum/...ght=dial+scans This is for scanning an existing scale, rather than creating from scratch. -Tony |
23rd Oct 2009, 3:52 pm | #3 |
Moderator
Join Date: Jun 2003
Location: Oxford, UK
Posts: 27,965
|
Re: Using Acetates to recreate dial markings
You may find it very difficult to create a realistic looking tuning scale using simple software like Wordpad. The best approach is to start with a scan, even if the scan is incomplete or incorrect for your model, and modify it using a graphics editing program. There is a drawing program in the OpenOffice suite which is on it's way to you, or you could download the free GIMP graphics editor. Both these programs are difficult for a beginner though, because they can do so much.
The big problem is always the impossibility of printing white onto transparent film using a standard inkjet printer. You may need to change the colour scheme of the tuning scale as a workaround. Paul |
23rd Oct 2009, 7:31 pm | #4 |
Rest in Peace
Join Date: Mar 2006
Location: N.W. Oxfordshire(Chipping Norton)
Posts: 7,306
|
Re: Using Acetates to recreate dial markings
I shall await reception of the Open Office suite, Paul. In the meantime I will scan the dial in question, and save it. Incidentally the calibrations, station names, etc., are in Black on
a clear background, printed directly on the glass. |
26th Oct 2009, 1:25 pm | #5 |
Heptode
Join Date: Mar 2003
Location: Waiheke Island, New Zealand
Posts: 503
|
Re: Using Acetates to recreate dial markings
But if you are careful you can paint the patch where the decal is going white and then stick the decal on top so it shows through the transparent bit..
|