|
Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc. |
|
Thread Tools |
1st Apr 2018, 9:45 pm | #1 |
Retired Dormant Member
Join Date: Mar 2017
Location: London, UK.
Posts: 24
|
Sony C5 stopped ejecting and now doesn’t load
Hi guys,
Are there anyone that still repair these machines? My C5 was working very well and the picture quality is very good. At the moment, it rewinds and forwards, but when I press eject the motor is very quiet, which is unusual. I was watching something just now and pressed eject. Tape loader didn’t eject and managed to force it to get my tape out. The tape was snapped so I have to repair the tape. Now, I have to slam the loader for it to stay down. When you put a tape inside the tape doesn’t load. Don’t know what happened and I’m very disappointed. Eject and tape loader not working. |
1st Apr 2018, 9:58 pm | #2 |
Dekatron
Join Date: Aug 2007
Location: W.Butterwick, near Doncaster UK.
Posts: 8,935
|
Re: Sony C5 stopped ejecting and now doesn’t load
Possibly belt trouble. Stretched?
__________________
G8JET BVWS Archivist and Member V.M.A.R.S Last edited by AC/HL; 2nd Apr 2018 at 8:04 pm. Reason: Duplicate username merged |
1st Apr 2018, 10:02 pm | #3 |
Heptode
Join Date: Mar 2015
Location: Lefkada, Greece
Posts: 969
|
Re: Sony C5 stopped ejecting and now doesn’t load
Did you remove the tape with the loading ring in the loaded position?
|
1st Apr 2018, 10:30 pm | #4 |
Retired Dormant Member
Join Date: Mar 2017
Location: London, UK.
Posts: 24
|
Re: Sony C5 stopped ejecting and now doesn’t load
Is it easy to change belts?
I removed the tape and the tape wasn’t fully unlaced. There was tape stuck and I just pulled it. I had the same problem last month when a tape refused to eject. I managed to get it ejected after 15 attempts. I just switched the machine on and off. I thought it was a dodgy tape, but realised there’s a problem. |
1st Apr 2018, 11:38 pm | #5 |
Heptode
Join Date: Mar 2015
Location: Lefkada, Greece
Posts: 969
|
Re: Sony C5 stopped ejecting and now doesn’t load
That sounds like the loading belt is slipping. Order a belt kit from here:
https://www.safferthal.de/de/VR-70-Riemen.html |
1st Apr 2018, 11:42 pm | #6 |
Heptode
Join Date: May 2009
Location: Birmingham, West Midlands, UK.
Posts: 708
|
Re: Sony C5 stopped ejecting and now doesn’t load
If you have other tapes and this has snapped - then bin it- a repaired tape can knock chips out of the aging and now very precious video heads..
|