|
Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here. |
|
Thread Tools |
13th May 2009, 4:03 pm | #1 |
Nonode
Join Date: Jun 2004
Location: Norwich, Norfolk, UK.
Posts: 2,543
|
Marconi 296 speaker surround
Hi,
My Bakelite speaker surround is missing both its horizontal bars. Please could somebody show me some photos and take some measurements of these missing bits (especially the 'M') so I can make something up Regards David |
13th May 2009, 4:45 pm | #2 |
Dekatron
Join Date: Nov 2003
Location: Fakenham, Norfolk, UK.
Posts: 4,259
|
Re: Marconi 296 speaker surround
Hello David,
This set's a 262 but I think the surround is the same (overall dimensions 209 x 170mm.) If so: Distance between upper peaks of the M = 12.5mm. Between outermost lower points of the M, 27.5mm. Height of the M 25mm. Upper bar 6.5mm x 4mm Lower bar 9 x 4 mm. Regards, Paul |
13th May 2009, 4:53 pm | #3 |
Nonode
Join Date: Jun 2004
Location: Norwich, Norfolk, UK.
Posts: 2,543
|
Re: Marconi 296 speaker surround
Excellent, Thank you Paul
I couldn't have asked for more! Thanks David |