UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Cabinet and Chassis Restoration and Refinishing


Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here.

Thread Tools
Old 15th May 2020, 8:58 pm   #1
Join Date: Oct 2008
Location: Aalborg, Denmark
Posts: 890
Default EM84 Mounting Bezel


Has anyone here done a 3D-print of a mounting Bezel for an EM84 (or other) magic eye valve ?
Originally they were done in bakelite, plastic or even brass and the valve was usually fixed against the rear of the Bezel with a coiled spring wrapped around the valve.
Cheap 3D-printing would of course be done in plastic but metal-printing is also a choice if you can afford it, se the attached picture. This Bezel was even gilded in 9ct. gold. (Picture taken from the Internet)


Attached Thumbnails
Click image for larger version

Name:	EM84 Bezel.jpg
Views:	78
Size:	30.4 KB
ID:	205920  
tri-comp is online now   Reply With Quote

Thread Tools

All times are GMT +1. The time now is 5:56 am.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.