Help !! Bother with a PX4 not doing its thing - Page 2 - UK Vintage Radio Repair and Restoration Discussion Forum

ekjdm14 · 15th May 2020, 2:07 pm

Brilliant thanks, I believe I've found it. Was the blowing clear done via cap between G and (commoned) F pins or did it happen "organically"?

By the way, the thread mentioned (and it's offshoot) is a hugely interesting read as regards the legal implications of doing paid renovation work on sets, as well as the restoration of the set itself & the methods trialled and used in getting round the problems faced. Glad I took the time to read it all!

Cheers,

15th May 2020, 2:07 pm	#21
ekjdm14 Banned Join Date: Feb 2019 Location: Congleton, Cheshire, UK. Posts: 609	Re: Help !! Bother with a PX4 not doing its thing Brilliant thanks, I believe I've found it. Was the blowing clear done via cap between G and (commoned) F pins or did it happen "organically"? By the way, the thread mentioned (and it's offshoot) is a hugely interesting read as regards the legal implications of doing paid renovation work on sets, as well as the restoration of the set itself & the methods trialled and used in getting round the problems faced. Glad I took the time to read it all! Cheers,