UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Television Standards Converters, Modulators etc

Notices

Television Standards Converters, Modulators etc Standards converters, modulators anything else for providing signals to vintage televisions.

Reply
 
Thread Tools
Old 21st May 2021, 12:44 pm   #1
ConnorFOD
Triode
 
Join Date: Mar 2021
Location: London, UK.
Posts: 23
Default System A PC Modulator Issue

Hello, I've recently purchased a PC - 405 Line modulator from a member on here. I'm having trouble getting any sort of signal on my television?

I have connected the modulator to power, I have a cable going from RF out, into an adapter to convert it to Aerial, into the tv.

Test card and tone is set to on, none of the channels on the TV or modulator show anything, however when I switch channel I am getting a change in static shown on the TV, Any ideas?

I know I will at some point have to connect to a graphics card and convert from that, but surely a test card should work just from connecting the modulator, or am I mistaken?

- Connor

Last edited by ConnorFOD; 21st May 2021 at 12:52 pm.
ConnorFOD is offline   Reply With Quote
Old 21st May 2021, 6:52 pm   #2
FRANK.C
Heptode
 
FRANK.C's Avatar
 
Join Date: Feb 2006
Location: Roscommon, Ireland
Posts: 665
Default Re: System A PC Modulator Issue

Hi Connor
It might help if we knew which Modulator and TV you are using.

If it is a Vol system A modulator.
Then if the test card and tone switches are on there will be a test card and test tone on whichever channel the modulator is set to.

Frank
__________________
FRANK.C is online now   Reply With Quote
Old 22nd May 2021, 6:40 am   #3
rambo1152
Nonode
 
rambo1152's Avatar
 
Join Date: May 2010
Location: Manchester, UK.
Posts: 2,962
Default Re: System A PC Modulator Issue

If the noise on the screen disappears and the screen goes significantly darker when the carrier is on, it's all probebly working normally.
__________________
--
Graham.
G3ZVT
rambo1152 is online now   Reply With Quote
Reply

Thread Tools



All times are GMT. The time now is 4:01 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.