|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
27th Oct 2018, 1:21 pm | #1 |
Heptode
Join Date: Feb 2009
Location: Rotherham, South Yorkshire, UK.
Posts: 559
|
Racal Dana 9917A
Hello.
My Racal Dana 9917A as just stop working. It lights up with all 8s a cross the Display. when I apply a signal to the 2 inputs A and B it will not read the signal. I have not been able to get my hands on a service manual in the last 2 years. It maybe a ICTL 081CP that as given up. Regads Kevin |
27th Oct 2018, 1:45 pm | #2 |
Moderator
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,289
|
Re: Racal Dana 9917A
__________________
Graham. Forum Moderator Reach for your meter before you reach for your soldering iron. |
27th Oct 2018, 1:50 pm | #3 |
Moderator
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,289
|
Re: Racal Dana 9917A
__________________
Graham. Forum Moderator Reach for your meter before you reach for your soldering iron. |
27th Oct 2018, 7:24 pm | #4 |
Octode
Join Date: Oct 2007
Location: Exeter, Devon, UK.
Posts: 1,554
|
Re: Racal Dana 9917A
Racal 9917-9918. Part of the 9910 series from 1984/5. I attach a extract from the Racal catalogue and specification, which suggests that the 9917A and 9918 are virtually identical.
I have the 9921, a later extension of the 9918 with a channel C which goes up to mid Ghz and in a wider case, to accomodate the extra channel and divider panel. I think that "k04bb" has the 9918 manual on his invaluable web site. It is sometimes a bit touchy to download. If you are stuck, then I will scan my copy of the 9918/9921 but there will be some delay as it is a very large manual. Though not a much as the two years search you mention. wme_bill m0wpn |
27th Oct 2018, 9:06 pm | #5 |
Heptode
Join Date: Jun 2009
Location: St Helens, Lancashire, UK.
Posts: 641
|
Re: Racal Dana 9917A
I have a copy of the technical manual and schemetics
Not sure where i got it from, possibly someone on here. More than happy to send a copy to you if you PM me with an e-mail address Not the best copy but perfectly useable. Peter
__________________
SPECIALIST.....Knows everything about nothing EXPERT..........Knows nothing about everything |
28th Oct 2018, 10:37 pm | #6 |
Heptode
Join Date: Jun 2010
Location: Zurich, Switzerland
Posts: 538
|
Re: Racal Dana 9917A
|
29th Oct 2018, 8:36 am | #7 |
Heptode
Join Date: Feb 2009
Location: Rotherham, South Yorkshire, UK.
Posts: 559
|
Re: Racal Dana 9917A
Hello and Good morning. Thank you to Graham/WMB-bill/Peter/Karl for taking the time to help me. Peter I will send my email address to you for the Manual and Scheamatic.
Regards Kevin |
30th Oct 2018, 9:32 am | #8 |
Heptode
Join Date: Feb 2009
Location: Rotherham, South Yorkshire, UK.
Posts: 559
|
Re: Racal Dana 9917A
Hello and good morning.
Peter has sent me the full manual by email. A big thank You to Peter and all that have taken the time to help me. Kind Regards Kevin. |