|
Homebrew Equipment A place to show, design and discuss the weird and wonderful electronic creations from the hands of individual members. |
|
Thread Tools |
7th Jan 2019, 11:52 am | #1 |
Retired Dormant Member
Join Date: Jan 2019
Location: Amsterdam, The Netherlands
Posts: 2
|
Loftin-White with 6C33C valves
Good afternoon gentlemen,
Please allow me to give a brief introduction. I’ve not tinkered with tubes since the ‘90s, but as I’m getting older the desire to do so becomes stronger. I’ve been fortunate enough to be able to start a collection of parts over the years and am currently evaluating various single-ended designs around the Russian 6C33C, as I have a number of these available. I find the Loftin-White design intriguing, but am not (yet) capable of adapting that to the 6C33C. I have profound (20+ years) of experience as an electronics engineer, but I’ve never worked with tubes in my line of work. So I’m wondering whether there’s any designs to be found that can be adapted to the 6C33C, or whether anyone can offer some design assistance? Looking forward to the replies on this query. Thanks and best regards, Sander Sassen. |
7th Jan 2019, 12:35 pm | #2 |
Dekatron
Join Date: May 2003
Location: Edinburgh, UK.
Posts: 3,274
|
Re: Loftin-White with 6C33C valves
Hi Sander,
Darius (Old Europe on this forum) has done a lot of work on Loftin White designs. See: http://rl12t15.blogspot.com/2007_09_01_archive.html Peter |
7th Jan 2019, 3:16 pm | #3 |
Retired Dormant Member
Join Date: Jan 2019
Location: Amsterdam, The Netherlands
Posts: 2
|
Re: Loftin-White with 6C33C valves
Thanks Peter, I’ve sent him a message.
|