6th May 2018, 6:32 pm | #1 |
Heptode
Join Date: Feb 2013
Location: Rainham, Kent, UK.
Posts: 525
|
Magic Eye
Hello. Can anyone identify this magic eye, CT8 base ? I thought it was an EM4 but as you can see from the images its marked 9.6 6D3. The top also has an extra support wire? Compared with the EM4 / EM34.
Colin |
6th May 2018, 6:48 pm | #2 |
Hexode
Join Date: May 2005
Location: Wigan, Greater Manchester, UK.
Posts: 479
|
Re: Magic Eye
TV6 or TV4?
|
6th May 2018, 6:56 pm | #3 |
Dekatron
Join Date: Sep 2007
Location: Oxfordshire, UK.
Posts: 4,311
|
Re: Magic Eye
__________________
http://www.ampregen.com |
6th May 2018, 7:36 pm | #4 |
Dekatron
Join Date: Aug 2007
Location: W.Butterwick, near Doncaster UK.
Posts: 8,935
|
Re: Magic Eye
I think EM1 too.
__________________
G8JET BVWS Archivist and Member V.M.A.R.S |
6th May 2018, 7:39 pm | #5 |
Dekatron
Join Date: Feb 2007
Location: Lynton, N. Devon, UK.
Posts: 7,088
|
Re: Magic Eye
TV4 or TV4a or A39A?
Can you power-up the heater and see if it 'looks' right at 4V or 6.3V? |
6th May 2018, 7:55 pm | #6 |
Heptode
Join Date: Feb 2013
Location: Rainham, Kent, UK.
Posts: 525
|
Re: Magic Eye
Thanks for all the replies. I wonder why I can't find the number on the side referenced anywhere?
I will try and power up the heater later, if it's not o/c. |
6th May 2018, 8:33 pm | #7 |
Heptode
Join Date: Feb 2013
Location: Rainham, Kent, UK.
Posts: 525
|
Re: Magic Eye
At 6V it's around 300ma. At 4V you can only see it glowing in dimed lighting. I tried to compare with an EM34 for reference.
|