UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Hints, Tips and Solutions (Do NOT post requests for help here)

Notices

Hints, Tips and Solutions (Do NOT post requests for help here) If you have any useful general hints and tips for vintage technology repair and restoration, please share them here. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Closed Thread
 
Thread Tools
Old 15th Jul 2022, 11:29 am   #1
60 oldjohn
Dekatron
 
Join Date: Dec 2004
Location: East Yorkshire, UK.
Posts: 3,957
Default Repairing Hard plastic

Flaps on TVs, monitors and VCRs often suffer damage to fixing clips, I have never had any success in gluing the small lugs back. Have a look here only need to watch from 4.45 for 2 minute or so to get the idea. https://www.youtube.com/watch?v=n1meoZaHYZo

John.
__________________
My favourite text message "I'll be there in five minutes, if not read again"
60 oldjohn is online now  
Old 15th Jul 2022, 1:11 pm   #2
Reelman
Octode
 
Reelman's Avatar
 
Join Date: Aug 2008
Location: Rotherham, South Yorkshire, UK.
Posts: 1,700
Default Re: Repairing Hard plastic

That looks brilliant John, this afternoon I’m out to get the baking soda and superglue. Got two of the grandkids toys to repair!

Peter
Reelman is offline  
Old 15th Jul 2022, 2:26 pm   #3
60 oldjohn
Dekatron
 
Join Date: Dec 2004
Location: East Yorkshire, UK.
Posts: 3,957
Default Re: Repairing Hard plastic

Hi Peter, I've known about that mixture for a while but never thought about making parts and building up lost plastic parts.

John.
__________________
My favourite text message "I'll be there in five minutes, if not read again"
60 oldjohn is online now  
Old 15th Jul 2022, 6:34 pm   #4
buggies
Heptode
 
buggies's Avatar
 
Join Date: Jan 2009
Location: West Lothian, UK.
Posts: 760
Default Re: Repairing Hard plastic

I have not used it for small parts but it has saved a good few pounds by repairing cracks in the handle area of a freezer drawer.
Two points - the reaction is exothermal ( burns finger ) and the result very hard to file to a neat shape on a flat surface like the drawer - so remains ugly - but functional.
Attached Thumbnails
Click image for larger version

Name:	baksod1.jpg
Views:	156
Size:	27.2 KB
ID:	261008  
__________________
George
buggies is offline  
Old 15th Jul 2022, 8:13 pm   #5
Cruisin Marine
Heptode
 
Join Date: Jul 2018
Location: Worthing, West Sussex, UK.
Posts: 983
Default Re: Repairing Hard plastic

New to me but looks marvelous, I shall use this sometime soon- thank you
Cruisin Marine is offline  
Old 15th Jul 2022, 11:15 pm   #6
Andrewausfa
Octode
 
Andrewausfa's Avatar
 
Join Date: Dec 2010
Location: St Ives, Cambridgeshire, UK.
Posts: 1,180
Default Re: Repairing Hard plastic

Been used in aircraft modelling for many years. An additional trick is to stuff bits of baby/household wipe into any large gaps and apply the superglue or use same as a sheet materialmuch like those Isopon 38 car body repair kits you used to get with the fibre glass matting. Idea being you can layer several sheets of baby wipes, apply the superglue into a very dense and strong material you can saw/cut/sand to suit.

Andrew
__________________
Invisible airwaves crackle with life. Or they should do.
BVWS Member
Andrewausfa is offline  
Old 16th Jul 2022, 2:14 am   #7
Bazz4CQJ
Dekatron
 
Bazz4CQJ's Avatar
 
Join Date: Apr 2009
Location: Oxfordshire, UK.
Posts: 4,923
Default Re: Repairing Hard plastic

That's interesting and may well be useful. However, I never ceased to be amazed at what you can do with a cheap glue-gun in terms of replacing broken or missing plastic. The very poor man's 3D printer!

B
__________________
Saturn V had 6 million pounds of fuel. It would take thirty thousand strong men to lift it an inch.
Bazz4CQJ is offline  
Old 16th Jul 2022, 10:48 am   #8
emeritus
Dekatron
 
Join Date: Jan 2012
Location: Brentwood, Essex, UK.
Posts: 5,316
Default Re: Repairing Hard plastic

The superglue and soda method certainly looks interesting.

Methylene chloride (dichloromethane) will dissolve most plastics (but not Bakelite or polypropylene), and despite supposedly having been banned, is still readily available in small (57 ml) bottles under the name "Plastic Weld" from shops that sell plastic model kits. Fine for welding together items that have broken cleanly, but not for filling voids, although this can be done by inserting slivers of plastic cut roughly to size into gaps and flooding with solvent to soften it, using an artists' paint brush. Reinforcement on the non-visible side (where applicable) can be done by applying layers of styrene sheet (Plastikard). The solvent evaporates very quickly and fuses the layers into a solid mass.

Plastic Padding is good, but has become difficult/impossible to find locally these days. I use Ronseal High Performance Wood Filler instead, which looks like, smells like, and behaves like, Plastic Padding Type Soft.

For broken hinges on larger items I have used steel wire reinforcement, drilling holes or cutting grooves in both parts to accommodate the wire, encasing the area with Plastic Padding or Araldite, and finishing off by filing to size as required

Last edited by emeritus; 16th Jul 2022 at 11:01 am. Reason: wire reinforcing added, typos
emeritus is offline  
Old 16th Jul 2022, 3:05 pm   #9
Andrewausfa
Octode
 
Andrewausfa's Avatar
 
Join Date: Dec 2010
Location: St Ives, Cambridgeshire, UK.
Posts: 1,180
Default Re: Repairing Hard plastic

Another method I use is to use the discarded sprues from a model kit, cut them into 1 cm sections, put them in a glass jar and cover them with cellulose thinner. After a day or so they will dissolve into a plastic goop you can fill gaps or mould stuff with (impression moulds). It takes a few days to cure but when ready can be cut and sanded as per styrene. The only thing to watch is slight shrinkage.

Andrew
__________________
Invisible airwaves crackle with life. Or they should do.
BVWS Member
Andrewausfa is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 10:41 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.