UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Audio (record players, hi-fi etc)

Notices

Vintage Audio (record players, hi-fi etc) Amplifiers, speakers, gramophones and other audio equipment.

Closed Thread
 
Thread Tools
Old 16th Jan 2021, 4:50 pm   #1
reeltoreelrob
Pentode
 
Join Date: Nov 2010
Location: Birmingham, West Midlands, UK.
Posts: 202
Default Dial lamps philips 13rf836

Hi all,
Just a quick question about the above, it has 3 bulbs all of which are blown, the voltage is 12, and ideas if car dash bulbs would suit, size is fine and they are 12v 1.2w.
I didn't really want to change to LED unless I had to although I had good results in the past using LEDs.
Thanks in advance.
Rob.
reeltoreelrob is offline  
Closed Thread




All times are GMT +1. The time now is 4:33 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.