UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment


Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Thread Tools
Old 16th Aug 2019, 9:27 am   #2241
The Philpott
Join Date: Aug 2016
Location: Colchester, Essex, UK.
Posts: 1,850
Default Re: AVO Multimeter survey

I think it would be the result of two bods on the same part of the production line, working at different rates (or to a slightly different sequence of assembly) in the last week of July and the first week of August. Theory: one bod has been allocated 571 to 591, the other 592 to 612. The theory works even better if a night-shift is in place..

593 shows signs of being rushed- the facia dimensions are undersize relative to the back-box, resulting in the back-box cracking around the holes for the case screws. The back-box is bowed inwards from when the screws were tightened.


The Philpott is offline   Reply With Quote

Thread Tools

All times are GMT +1. The time now is 10:30 am.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2019, Paul Stenning.