Belgian RTT 56 - wiring for UK?? - UK Vintage Radio Repair and Restoration Discussion Forum

knocklyon35 · 19th Dec 2010, 7:34 pm

Hi, I have a Belgian phone which is wired for UK, but the wires are a bit threadbare so it's not properly working! Can get dial tone but that's about it.

As it's difficult to figure out which wires go where and I'm an amateur at this, I wondered if anyone could explain how the wiring is supposed to be?

Thanks.

Dave Moll · 20th Dec 2010, 12:36 pm

If the wires are simply threadbare, is it not simply a matter of noting where a wire is connected at each end and replacing with a new length of wire? Or have wires already been disconnected?

19th Dec 2010, 7:34 pm	#1
knocklyon35 Retired Dormant Member Join Date: Nov 2010 Location: Kent. Posts: 20	Belgian RTT 56 - wiring for UK?? Hi, I have a Belgian phone which is wired for UK, but the wires are a bit threadbare so it's not properly working! Can get dial tone but that's about it. As it's difficult to figure out which wires go where and I'm an amateur at this, I wondered if anyone could explain how the wiring is supposed to be? Thanks. Last edited by Darren-UK; 19th Dec 2010 at 8:55 pm. Reason: FSK.

20th Dec 2010, 12:36 pm	#2
Dave Moll Dekatron Join Date: Feb 2005 Location: West Cumbria (CA13), UK Posts: 6,127	Re: Belgian RTT 56 - wiring for UK?? If the wires are simply threadbare, is it not simply a matter of noting where a wire is connected at each end and replacing with a new length of wire? Or have wires already been disconnected? __________________ Mending is better than Ending (cf Brave New World by Aldous Huxley)