|
Success Stories If you have successfully repaired or restored a piece of equipment, why not write up what you did and post details here. Particularly if it was interesting, unusual or challenging. PLEASE DO NOT POST REQUESTS FOR HELP HERE! |
|
Thread Tools |
23rd Nov 2018, 1:04 am | #1 |
Tetrode
Join Date: Nov 2018
Location: Serzedo, Portugal.
Posts: 83
|
Philips X19T 611/00
Hi everyone
i bought 4 philips TV's that belonged to a local repair guy who passed away i gave 25€ for each this is the first one i repaired from the four its a philips X19T 611/00 its mostly tubes but it also has a few transistors..it appears to be mid to late 60's when first arrived the tuner was frozen and i had to disassemble it and heat the parts with a hair-dryer to get them loose and re-lubricate all of them the boost capacitor was shorted and the booster diode or damper tube like some call it was redplating so it had no raster because it loads down the flyback and kills the high voltage after replacing that capacitor the High voltage rectifier started glowing purple, probably open filament and it causes it to emmit x-rays so i replaced it now its working very well i have a video on the tuner repair i dont have and cannot find a schematic for this set if anybody has any info it would be fantastic here it is working on all original capacitors and resistors Last edited by PortugalTV; 23rd Nov 2018 at 1:10 am. |
23rd Nov 2018, 8:22 am | #2 |
Heptode
Join Date: Feb 2009
Location: Rotherham, South Yorkshire, UK.
Posts: 559
|
Re: philips x19t 611 100
Good morning,
Keep the good work up and let us see how you get on with the other TVs. Kevin |
23rd Nov 2018, 8:55 am | #3 |
Dekatron
Join Date: Jan 2005
Location: Oxford, UK.
Posts: 17,863
|
Re: philips x19t 611 100
Lovely, clear picture too. Good work indeed!
|
23rd Nov 2018, 2:33 pm | #4 |
Tetrode
Join Date: Nov 2018
Location: Serzedo, Portugal.
Posts: 83
|
Re: Philips X19T 611/00
hi to all
really it has a very nice picture, the crt must be in excellent condition because i have the brightness set to less than 3/4 of the knob next weekend i will be digging into the other sets and will upload some repair footage also instead of just showing the results. greetings |