The Thanks Thread - Page 44 - UK Vintage Radio Repair and Restoration Discussion Forum

Mike Phelan · 24th Apr 2018, 9:55 am

A big thanks to Graham (llama) who posted me a Vero connector to repair my vacuum cleaner.

captainpugwash · 24th Apr 2018, 3:01 pm

Thanks to Rob (whiskas) for the superb packing of the Grundig.

Kind regards,

David

The Philpott · 28th Apr 2018, 12:58 pm

Thankyou to Hugh for the Belling-Lee captive terminal, arrived today. Just the ticket!

captainpugwash · 28th Apr 2018, 9:12 pm

Thanks to Steve (music-centre) for the equally excellent packaging on the GEC radio.

Kind regards,

David

electronicskip · 30th Apr 2018, 2:52 pm

Thanks to David (nutteronthebus) for the Sony unit.

Nickthedentist · 30th Apr 2018, 3:13 pm

A huge thank-you to David T (David G4EBT) for the beautifully-constructed and laid-out FM-AM converter.

Not only did it arrive almost instantly, but the way it's put together is to professional standards (better, in fact, than commercial products as it uses "proper" solder), and it's finished off with an informative leaflet describing its operation etc. Truely plug-and-play too, apart from the PIC.

I'm very impressed, and very grateful.

THANK YOU, David

John M0GLN · 30th Apr 2018, 3:42 pm

Although I always thank the people concerned either by PM or email I forget about posting here, so my apologies to all I have missed in the past but here are thanks to the latest members who have helped me,

to pmmunro for saving my Avo 8 from the scrapheap,
to Wavey Dipole for the Avo Minor case,
to Steve Bell for the DVD recorder and for him transporting it to Ed Dinnings house,
and to Ed Dinning for transporting it to Golborne for me.

Many Thanks to All

John

Cobaltblue · 30th Apr 2018, 4:30 pm

A Big thank you to Andy (Diabolical Artificer) to the little battery valves and a couple of not such little ones

Excellent packaging ensured they all arrived safe and sound.

Thank You Andy

Cheers

Mike T

Phil G4SPZ · 30th Apr 2018, 5:43 pm

Grateful thanks to Peter Munro (Forum member "PMM") for providing service information and suggestions which have enabled me to fix a fault on my Avo EA113.

Reelman · 1st May 2018, 11:12 pm

A big thanks to Bob_Moss for the Sony stereo system I have just collected from him. It was good of him to remember me since it was originally offered back in January and claimed by another member. This fell through so it came to me!

Thanks again Bob,

Peter

G8HQP Dave · 2nd May 2018, 12:13 pm

Thanks to Paul Stenning for having a site Privacy and Cookie Policy which is easy to read, easy to understand and doesn't hide behind vague generalities. It is clear what you get if you are happy with it, and what still works if you don't accept it.

A few days ago I read the corresponding document from IEEE; you might think that such a member organisation would be similarly clear but it wasn't.

Nickthedentist · 8th May 2018, 1:53 pm

Thanks to Kevin (kevinB) for personally delivering the lovely Philips radio to me for less than a decent courier would charge, and for a very enticingly-priced, well-restored radio too. Very nice to meet you too.

Nick.

Nickthedentist · 8th May 2018, 1:54 pm

And to Glyn (ToneArm) for the generous gift of the Fluke DMM, and for sending it instantly too.

Nick.

vinrads · 8th May 2018, 1:58 pm

A big thank you to Jerry cathoderay57 for sending me the EL33 fast posting and very well packed .Mick.

Reelman · 13th May 2018, 11:12 pm

Grateful thanks to Electronicskip for the Roberts radio and 1100 man for the two Grundig tape recorders collected at the NVCF today.
Good to meet both you gentlemen and hope you had as good a day as I had. Bought far too much but so difficult to refuse a bargain isn’t it?

Thanks again chaps!
Peter

*** Reminder to all, next Sunday is Dunstable Downs Radio Club Boot Sale near Luton ***

LukeG83 · 14th May 2018, 11:02 am

A massive thanks to Dave Moll and Dazzlevision for their help in getting a Ferguson Videostar to me this weekend.

Dave Moll kindly volunteered to transport the machine for me, and met me at a local service station on the way home.

Many thanks!

Radiocruncher · 14th May 2018, 6:41 pm

Thanks to Steve (colourstar) who met up with me at the NVCF to pass over a lovely old Sharp radio cassette player. Greatly appreciated and brings back many fond memories of my youth.

Thanks Steve

Regards

Graham

1100 man · 15th May 2018, 12:40 am

Many thanks to Neil29 for bringing a Thorn 1500 TV up from Wales for me and to Colourstar (Steve) for taking it on the final bit of the journey up to the NVCF.
My grateful thanks to both of you!

My thanks also to Andy (Beery) for remembering nearly a year later that I had asked for a Fireball tuner. A very pleasant surprise and good to meet you and David (Fernseh).
All the best
Nick

Goldie99 · 15th May 2018, 8:41 am

A big thanks to Graham (GroovyG) for the switches, which all arrived safely over the weekend.

Cheers,
Alan

electronicskip · 15th May 2018, 1:29 pm

Big thanks To Hamish Boxer for the Prestel equipment and BSB goodies. also the surprise Grundig 2x4 video service data/manuels.
Thanks for bringing them to the show, nice to meet you.

24th Apr 2018, 9:55 am	#861
Mike Phelan Dekatron Join Date: Nov 2003 Location: Near Leeds, West Yorkshire, UK Posts: 4,195	Re: The Thanks Thread A big thanks to Graham (llama) who posted me a Vero connector to repair my vacuum cleaner. __________________ Mike.

24th Apr 2018, 3:01 pm	#862
captainpugwash Pentode Join Date: Jan 2015 Location: Bishop Auckland, County Durham, UK. Posts: 223	Re: The Thanks Thread Thanks to Rob (whiskas) for the superb packing of the Grundig. Kind regards, David

28th Apr 2018, 12:58 pm	#863
The Philpott Octode Join Date: Aug 2016 Location: Colchester, Essex, UK. Posts: 1,104	Re: The Thanks Thread Thankyou to Hugh for the Belling-Lee captive terminal, arrived today. Just the ticket!

28th Apr 2018, 9:12 pm	#864
captainpugwash Pentode Join Date: Jan 2015 Location: Bishop Auckland, County Durham, UK. Posts: 223	Re: The Thanks Thread Thanks to Steve (music-centre) for the equally excellent packaging on the GEC radio. Kind regards, David

30th Apr 2018, 2:52 pm	#865
electronicskip Heptode Join Date: Oct 2010 Location: Gloucester, Glos. UK. Posts: 700	Re: The Thanks Thread Thanks to David (nutteronthebus) for the Sony unit.

30th Apr 2018, 3:13 pm	#866
Nickthedentist Dekatron Join Date: Jan 2005 Location: Oxford, UK. Posts: 13,845	Re: The Thanks Thread A huge thank-you to David T (David G4EBT) for the beautifully-constructed and laid-out FM-AM converter. Not only did it arrive almost instantly, but the way it's put together is to professional standards (better, in fact, than commercial products as it uses "proper" solder), and it's finished off with an informative leaflet describing its operation etc. Truely plug-and-play too, apart from the PIC. I'm very impressed, and very grateful. THANK YOU, David

30th Apr 2018, 3:42 pm	#867
John M0GLN Heptode Join Date: Jan 2004 Location: Southport, Lancashire, UK. Posts: 770	Re: The Thanks Thread Although I always thank the people concerned either by PM or email I forget about posting here, so my apologies to all I have missed in the past but here are thanks to the latest members who have helped me, to pmmunro for saving my Avo 8 from the scrapheap, to Wavey Dipole for the Avo Minor case, to Steve Bell for the DVD recorder and for him transporting it to Ed Dinnings house, and to Ed Dinning for transporting it to Golborne for me. Many Thanks to All John

30th Apr 2018, 4:30 pm	#868
Cobaltblue Nonode Join Date: Dec 2010 Location: Exeter and Poole, UK. Posts: 2,783	Re: The Thanks Thread A Big thank you to Andy (Diabolical Artificer) to the little battery valves and a couple of not such little ones Excellent packaging ensured they all arrived safe and sound. Thank You Andy Cheers Mike T __________________ Don't care if it was a bargain why's it on my table? Mike T BVWS member. www.cossor.co.uk

30th Apr 2018, 5:43 pm	#869
Phil G4SPZ Dekatron Join Date: Apr 2005 Location: Bewdley, Worcestershire, UK. Posts: 3,895	Re: The Thanks Thread Grateful thanks to Peter Munro (Forum member "PMM") for providing service information and suggestions which have enabled me to fix a fault on my Avo EA113. __________________ Phil (BVWS / BVTVWM / NVM / GQRPC 2101) Optimist [n]: Someone who is not aware of the full facts

1st May 2018, 11:12 pm	#870
Reelman Heptode Join Date: Aug 2008 Location: Rotherham, South Yorkshire, UK. Posts: 610	Re: The Thanks Thread A big thanks to Bob_Moss for the Sony stereo system I have just collected from him. It was good of him to remember me since it was originally offered back in January and claimed by another member. This fell through so it came to me! Thanks again Bob, Peter

2nd May 2018, 12:13 pm	#871
G8HQP Dave Dekatron Join Date: Sep 2008 Location: Solihull, West Midlands, UK. Posts: 4,338	Re: The Thanks Thread Thanks to Paul Stenning for having a site Privacy and Cookie Policy which is easy to read, easy to understand and doesn't hide behind vague generalities. It is clear what you get if you are happy with it, and what still works if you don't accept it. A few days ago I read the corresponding document from IEEE; you might think that such a member organisation would be similarly clear but it wasn't.

8th May 2018, 1:53 pm	#872
Nickthedentist Dekatron Join Date: Jan 2005 Location: Oxford, UK. Posts: 13,845	Re: The Thanks Thread Thanks to Kevin (kevinB) for personally delivering the lovely Philips radio to me for less than a decent courier would charge, and for a very enticingly-priced, well-restored radio too. Very nice to meet you too. Nick.

8th May 2018, 1:54 pm	#873
Nickthedentist Dekatron Join Date: Jan 2005 Location: Oxford, UK. Posts: 13,845	Re: The Thanks Thread And to Glyn (ToneArm) for the generous gift of the Fluke DMM, and for sending it instantly too. Nick.

8th May 2018, 1:58 pm	#874
vinrads Octode Join Date: Feb 2009 Location: Chesterfield, Derbyshire, UK. Posts: 1,678	Re: The Thanks Thread A big thank you to Jerry cathoderay57 for sending me the EL33 fast posting and very well packed .Mick.

13th May 2018, 11:12 pm	#875
Reelman Heptode Join Date: Aug 2008 Location: Rotherham, South Yorkshire, UK. Posts: 610	Re: The Thanks Thread Grateful thanks to Electronicskip for the Roberts radio and 1100 man for the two Grundig tape recorders collected at the NVCF today. Good to meet both you gentlemen and hope you had as good a day as I had. Bought far too much but so difficult to refuse a bargain isn’t it? Thanks again chaps! Peter * Reminder to all, next Sunday is Dunstable Downs Radio Club Boot Sale near Luton *

14th May 2018, 11:02 am	#876
LukeG83 Pentode Join Date: Jul 2008 Location: Garstang, Lancashire, UK. Posts: 156	Re: The Thanks Thread A massive thanks to Dave Moll and Dazzlevision for their help in getting a Ferguson Videostar to me this weekend. Dave Moll kindly volunteered to transport the machine for me, and met me at a local service station on the way home. Many thanks!

14th May 2018, 6:41 pm	#877
Radiocruncher Hexode Join Date: Dec 2013 Location: Torrington, Devon UK. Posts: 382	Re: The Thanks Thread Thanks to Steve (colourstar) who met up with me at the NVCF to pass over a lovely old Sharp radio cassette player. Greatly appreciated and brings back many fond memories of my youth. Thanks Steve Regards Graham

15th May 2018, 12:40 am	#878
1100 man Heptode Join Date: Apr 2016 Location: Ventnor, Isle of Wight, & Great Dunmow, Essex, UK. Posts: 690	Re: The Thanks Thread Many thanks to Neil29 for bringing a Thorn 1500 TV up from Wales for me and to Colourstar (Steve) for taking it on the final bit of the journey up to the NVCF. My grateful thanks to both of you! My thanks also to Andy (Beery) for remembering nearly a year later that I had asked for a Fireball tuner. A very pleasant surprise and good to meet you and David (Fernseh). All the best Nick

15th May 2018, 8:41 am	#879
Goldie99 Hexode Join Date: Jul 2014 Location: Boston, Lincolnshire, UK. Posts: 436	Re: The Thanks Thread A big thanks to Graham (GroovyG) for the switches, which all arrived safely over the weekend. Cheers, Alan

15th May 2018, 1:29 pm	#880
electronicskip Heptode Join Date: Oct 2010 Location: Gloucester, Glos. UK. Posts: 700	Re: The Thanks Thread Big thanks To Hamish Boxer for the Prestel equipment and BSB goodies. also the surprise Grundig 2x4 video service data/manuels. Thanks for bringing them to the show, nice to meet you.