UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Amateur and Military Radio


Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment.

Closed Thread
Thread Tools
Old 15th May 2004, 8:08 pm   #1
Join Date: Apr 2003
Location: Salt Spring Island, BC, Canada
Posts: 368
Default Testing PT15 (T1154) transmitting valves

I would like to test the PT15 output valves in my T1154. They have the old 5 pin base. I was considering making a lash-up test circuit for them but wondered if they could be checked in a standard receiving valve tester like the AVO?
JHGibson is offline  
Old 15th May 2004, 9:10 pm   #2
jim_beacon's Avatar
Join Date: Mar 2003
Location: Bishop's Waltham, Hants, UK.
Posts: 939
Default Re: Testing PT15 transmitting valves

They can be done in the Valve Characteristic meters and I think, the CT160, but draw too much heater current for the "two panel" tester.

Jim Beacon G1JBG

Last edited by Station X; 27th Dec 2004 at 9:49 pm. Reason: Import
jim_beacon is offline  
Closed Thread

Thread Tools

All times are GMT +1. The time now is 5:35 am.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.